Should the tag be updated for the delayed calibration of the safety valve?
Thread Content
Dear HaiChuan friends: The safety valve has had its calibration date extended by one year; does it need to have a new label installed now? The TSG-21 regulations state that only after passing the inspection should the inspection agency issue a verification report and apply a lead seal to the safety device that has passed the verification. The safety valve operating procedures do specify that safety valves that have passed calibration must be labeled and sealed with lead. Could those with more experience please advise whether there are any regulations that explicitly require this?
This post was last edited by ylb913 on 2016-11-12 06:40: hazopУлhazop chin tremble
The question is, who will make the changes for you? The testing agency? Surely not. Will making the changes by yourself be sufficient?
In my opinion, this can be resolved from the following aspects: 1. Apply for an on-site inspection: In that case, the testing agency will come to the location for inspection, and they will replace the label； 2. If an extension is applied for, the logo will definitely not be changed ； **The institution has agreed to a delay for you; you just need to keep proper records, so that in case there are issues during subsequent reviews, you will have evidence to rely on ；