Gasification Daily Question: 2016-11-23 Fill-in-the-blank question (5 points for participation, 10 points for a correct answer)
Thread Content
This post was last edited by tfx511024 on 2016-11-24 at 14:47. Daily question on gasification: Fill-in-the-blank question for 2011-11-23 (5 points for participation, 10 points for a correct answer). Fill-in-the-blank: The flow rate of the coal slurry in the pipeline used for water-coal slurry gasification is (0.6) to (0.9) m/s； When the slurry flow rate is below (0.6) m/s, the slurry tends to settle; high flow rates cause severe erosion of the slurry pipelines. The results have been announced; please stop posting further replies.
The flow velocity in the coal slurry pipeline is (0.6 – 0.9 m/s). When the flow velocity is below (0.6 m/s), the coal slurry tends to settle, while high flow velocities cause severe erosion of the pipeline.
The slurry flow velocity in the coal slurry gasification pipeline is (0.6) to (0.9) m/s； When the slurry flow rate is below (0.6) m/s, the slurry tends to settle; high flow rates cause severe erosion of the slurry pipelines.
0.6~0.9； 0.6
0.5, 1, 0.5
0.6--0.9 0.6
0.6 0.9 0.6
0.6, 0.9, 0.6
The slurry flow velocity in the coal slurry gasification pipeline is (0.6) to (0.9) m/s； When the slurry flow rate is below (0.6) m/s, the slurry tends to settle; high flow rates cause severe erosion of the slurry pipelines.
0.6~0.9 ； 0.6
0.8m/s-1.0m/s Below 0.8m/s