C9 hydrogenation technology, operating parameters for two-stage hydrogenation, catalyst types, and service life
Thread Content
Currently, the C9 hydrogenation process involves two stages of hydrogenation; it is necessary to determine whether the sulfur content of the product can meet the requirements of National Standard V. Additionally, information on the operating parameters for these two stages of hydrogenation, as well as the types of catalysts used and their service life, is required
It should be possible; I’m not sure what your manufacturing process is like
Raw material gelatin: 300mg/ml; bromine value: 90-120；
The current three-stage hydrogenation process can meet the National V standards； Raw material gelatin: 300mg/ml; bromine value: 90-120 ； Can two-stage hydrogenation be achieved? Are there any catalyst manufacturers capable of doing this? ； Operating pressure of the device: 3.0 Mpa ；
Which company are you from, and whose technology do you use? Two stages should also be achievable, depending on how high your sulfur content is
Carbon 9 has a very low sulfur content; with either of the two processing methods, the sulfur content can be kept below 10 ppm regardless of the conditions used