Instructions for Portable Eye Washer

Thread Content

Purpose: The portable pressure skin/wash station is an essential piece of equipment for safety and occupational protection. It serves as a vital emergency protection device in situations where exposure to acids, bases, organic substances, and other toxic and corrosive materials is possible. It is suitable for use in laboratories as well as in outdoor settings across industries such as the petroleum industry, chemical industry, semiconductor industry, and pharmaceutical industry. Performance features: The portable pressure skin/wash station completely eliminates the problem of space consumption; its ability to store without taking up any space is its greatest advantage. It has the following features: 1. It provides professional protection promptly, in a fast and convenient manner. 2. No installation is required; it can be installed according to on-site needs or used directly. 3. Sufficient space is provided at the water outlet, allowing for the rinsing of glasses and the face, with manual assistance available if necessary. 4. Pressure skin/eye washer, made of non-toxic ABS engineering plastic; the container is equipped with a pressure relief valve to ensure stable water flow. 5. Add 3 kg of pure water (6 kg, 10 kg). On day 90, the pure water should be replaced and air should be added; push and pull the valve about 50 times (to 2.5 bar) to ensure a continuous water flow for 15 minutes. Usage method: 1. Adding water: Rotate the handle counterclockwise to lower the inflation cylinder, then add water to the container up to the 5 L (8 L, 12 L) mark. After adding water, simply tighten the handle inflation cylinder. 2. Inflation: Align the handle with the opening slot on the inflation cylinder, then push and pull the handle to start inflating; around 50 presses will result in a pressure of 2.5 bar, which is considered appropriate. When the pressure is too high, the vent valve will automatically release air. After inflation is complete, align the handle so that its positioning slot does not coincide with the opening slot of the inflation cylinder. 3. Rinsing: When rinsing is needed, press the switch button to release water; pressing it upward allows a continuous flow of water. Once rinsing is complete, press the switch button downward to turn off the water flow. 4. Adjusting the water spray: Rotate the nozzle counterclockwise for a misty spray, and clockwise for a columnar spray; the spray can be adjusted from columnar to misty. Precautions for using a pressure eye washer: 1. It does not have a drainage hole; please resolve the drainage issue in advance ； 2. If you choose purified water as the liquid for rinsing, please replace it regularly; the replacement interval is generally 5-7 days ； 3. As is common in working environments or environments with hazards, it is recommended to add a certain amount of professional eye-washing concentrate to the cleaning solution in order to better protect the eyes and face from damage, and this can also extend the shelf life of the liquid used for cleaning. 4. If acid or alkali solutions get into the eyes, it is first necessary to rinse them repeatedly with eye-washing solution, and then use an eye washer or seek medical assistance