Thread Content
Tips for choosing plywood. The following information was compiled and published by Youxing Shark Plywood Adhesive. https://shayugufen.cn/uploads/191206/5-1912061HRS50.jpg Plywood is a type of board that is commonly used in the manufacture of interior decorations and furniture. Edges of the panel adhesive – Check: 1. Examine the dashboard and check from the side to ensure it is smooth, flat, and free of defects; also verify that the thickness of the core material is uniform, with no overlapping or delamination. 2. Check the price; don’t try to get a lower price when making the purchase. It is recommended to choose a brand product that remains popular and is recognized by countries around the world. 2. Listen: Place the plywood on the ground, then use your hand or another blunt tool to strike different parts. The sound is more even and the quality is acceptable. If the sound is very different, it indicates a specific quality issue; it may be hollow inside. 3. High-quality plywood should be dry, smooth, and free of irregularities, with no variations in the horizontal direction. This indicates a low moisture content and good flatness. Four types of odors: if the wooden board has its natural scent, it indicates a low level of formaldehyde; whereas if the odor is unpleasant, it suggests a high level of formaldehyde. Glue around the joint areas – sawing: If conditions permit, you can inspect the wood to check whether it is dense on the inside, and whether there are any obvious gaps or damaged pieces of wood. There may be eggs on the rotten wood, and insects might appear in the future. Areas around the panel adhesive – Inspection: Check various logos on the product, such as whether the trademark comes from the usual manufacturer, factory certification, manufacturing address, after-sales service phone number, anti-counterfeiting marks, environmental labels, formaldehyde emission levels, and adhesive strength values. Of course, you won’t be disturbed, so the editor recommends using eco-friendly plywood! Eco-friendly retaining wall panels are made from high-quality southern fir, poplar, paulownia, etc., with the bottom layer fabricated from Ogmund veneer. Through an advanced manufacturing process that includes two rounds of high-grade sanding and two rounds of shaping, these products feature excellent flatness, minimal color variation, and low weight. Deformation and the like are not easy. Plywood has obtained green product certification, so it can be purchased with confidence.