2024.1.16 Recommended list of books
Thread Content
January 16, 2024. A list of recommended books:“CTP Troubleshooting and Maintenance” by Gao Feng, 2015 edition.
“Photocatalytic Water Treatment Technology” by Zhang Feng, 2015 edition.
“100 Common Faults and Solutions for Digital Copiers Used in Offices – Taking the Ricoh 3035 model as an example” by Zhang Wenqi and Zhao Jibin, 2017 edition.
“Mechanical Response and Safety Control of Surrounding Rock in Deep Roadways under Chemical Corrosion” by Liu Yongsheng, 2017 edition.
“Semiconductor Light Sources (LED, OLED) and Lighting Design” series; “Lighting Design: From Traditional Light Sources to LEDs” by Zhou Taiming et al., 2015 edition.
“Illustrated Quick Guide to Repairing Power Tools”, 2nd edition, compiled by Yu Chengwei, Ma Xiuyan, and Liu Qingshan, 2015 edition.
“Safety Series for Large Amusement Rides”; “Supervision and Inspection of Large Amusement Rides” edited by Lin Weiming, Wang Yinlan, and Zhang Yong, 2014 edition.
“Safety Technology Series for Large Amusement Rides”; “Typical Cases of Large Amusement Rides” compiled by Song Weike, Lin Weiming, and Guo Junjie, 2015 edition.
“Safety Technology Series for Large Amusement Rides”; “Operational Safety of Large Amusement Rides” compiled by Zhan Yunxin, E Lijun, and Chen Yi, 2015 edition.
“Safety Technology Series for Large Amusement Rides”; “Safety Management of Large Amusement Rides in Japan” edited by Lin Weiming; compiled by Li Jiashen, Li Haiting, and Chai Bin, 2016 edition.
“Research on Key Technologies for Forming Parts with Large Taper Reductions” by Xu Langui, 2017 edition.
“Practical Hardware Handbook”, Part 3: General Accessories and Devices; Section 15: Weighing Instruments and Commonly Used Meters, compiled by Shanghai Hardware Procurement and Supply Station, 1980 edition.
“Selected Manual of Hardware Tools Commonly Used by Workers”, 2016 edition, edited by Wang Jianshi and Zhu Binglin.
“Series on Engineering Safety Protection Theory and Technology”; “High-Temperature Dynamic Properties of Rocks” by Xu Jinyu and Liu Shi, 2016 edition.
“Practical Guide to Engineering Surveying Training”, edited by Yan Yuhou, 2016 edition.
“Safety of Handheld/Mobile Power Tools and Garden Tools” compiled by Li Bangxie, Pan Shunfang, and Gu Jing, 2015 edition.
“Quick Mastery Series for Skill Application”; “TArch 2014: From Beginner to Expert in Architectural Design” compiled by CAX Technology Alliance, Guo Haixia, and Zhang Dini, 2015 edition.
“Practical Tutorial on Regulatory Detailed Planning” edited by Xiong Jianlin, 2016 edition.
“Application of Numerical Simulation Techniques in Fire Investigation” by Xu Xiaonan, 2014 edition.
“Series of Digital Copier Repair Guides”; “Repair Guide for the Development System of Digital Copiers” by Chen Baochun, 2014 edition.
“Series of Digital Copier Repair Guides”; “Guide to Inspecting Electrical Components of Digital Copiers” edited by Chen Baochun, 2013 edition.
“Nonlinear Fluid Elasticity of Plates and Shells” by Bai Xiangzhong, Hao Yajuan, and Tian Zhenguo, 2016 edition.
“Basic Theoretical Research on the Electrostatic Field in Heat and Moisture Exchange via Water Film Anodes” by Chang Jingcai, 2018 edition.
“Key Technologies for Safe Operation of Special Electro-Mechanical Equipment and Amusement Rides” by Wang Hongjun and Xu Xiaoli, 2015 edition.
“Design and Deformation/Failure Control of Pipe-Anchor Support Systems for Excavation Adjacent to High-Rise Buildings: Typical Case Studies of Building Collapses” compiled by Rui Yongqin, Liu Shuzhi, Zhang Xuxu, Liu Luhai, and Chen Mingping, 2015 edition.
“Aesthetics of Everyday Life for Children: The Book of Gardens” written by Ava Kowalczyk and Adam Ujazdowski, 2018 edition.
“Filtration”; “Architectural Appreciation” by Zhang Zhenyu, 2016 edition.
“Principles of Boilers”, 2011 edition.
“Series of Textbooks for Assessment and Training of Boiler Safety Managers and Operators”; “Basic Knowledge of Boiler Operations” compiled by Cheng Shaobing et al., 2015 edition.
“Boiler Experimentation and Testing Techniques” edited by Yan Xiaozhong, 2016 edition.
“Training Manual on Boiler Wear and Explosion Prevention” compiled by Datang International Wear and Explosion Prevention Training Base, 2016 edition.
“Research on the Load-Bearing Capacity of Cold-Formed Thin-Walled Purlin Roof Systems under Wind Suction” written by Song Xiaoguang et al., 2015 edition
I am grateful to the Book Boy database for accompanying me in my studies, work, and life!
Thank you, Teacher Dong, for sharing. I learn knowledge from various fields every day, which is very beneficial to me
There is a house of gold in books; thank you, Teacher Dong, for sharing!
With the arrival of the Book Boy database, my life has become even more meaningful: thanks to the presence and company of the group leader.
Thank you to the Book Boy database for sharing; I make progress every day through learning.
Thank you to Teacher Dong for his selfless sharing; there is an abundance of materials, and I have benefited greatly from it.
Thanks for the link to the Shutong database – it’s fast and direct! ! !
Thank you to the Shutong database for its continuous help to me
Days are short, and every one of them is precious. The greatest wealth in life is experience; all the joys and sorrows hold value. I really like Hai Lai Amu’s song “But in This World” – “Even if one is generous and tolerant in everything, does that mean the hurt will stop?” ； Even if one is gentle and patient in everything, sadness never decreases. ”Today has passed; it’s all yesterday now. All gains and losses, joys and sorrows, are but fleeting things. Learn to let go of yourself, not neglect your passion, and not try to please those who are indifferent. The true meaning of life is to go with the flow and let things take their natural course.
I am grateful to the Book Boy Database, which has helped me experience every day of life as if it were bathed in sunshine. Happy group members!