Seeking pipe partners!
Thread Content
Newbie seeking help: A 1-ton jam jar is connected to an emulsification pump, and the mixture can then be sent on to the next processing stage. The parameters of the emulsification pump are as follows: inlet and outlet diameters of 50 and 40 respectively; the pump’s flow rate ranges from 0 to 12 m3/h, with a maximum flow rate required for sending the mixture to the next stage being 5 m3/h. How should the pipes be configured? Below is the schematic diagram
The piping needs to be determined based on the PID diagram and the layout of the equipment. What you have here is just a schematic; it doesn’t include valves, filters, instruments, etc., and there are no clear recommendations. It can be said that the pipe diameter should be determined based on economic flow rates and other requirements, but as for anything else, no suggestions can be given.