On the topic of \"Compilation of Chinese Machinery Industry Standards – Valves Volume (4th Edition)\\"
Thread Content
On the topic of \"Compilation of Standards for China’s Machinery Industry – Valves Volume (4th Edition)\": Book title: Compilation of Standards for China’s Machinery Industry – Valves Volume (4th Edition); Authors: National Valve Standardization Technical Committee, Third Editing Department of China Quality Inspection Publishing House; Publishers: China Quality Inspection Publishing House, China Standards Publishing House; Publication date: November 2012. Introduction: Since its publication, the series \"Compilation of Standards for China’s Machinery Industry – Valves Volume\" has seen three editions released, each one receiving high praise and playing a significant role in promoting the development of the valve industry and related fields. With the full implementation of the 12th Five-Year Plan, China’s standardization sector has developed at a rapid pace; while aligning itself with international standards, it has also continued to develop standards suitable for the national conditions of the country in various relevant industries. Due to the implementation of a large number of newly formulated and revised standards in recent years, and to meet the needs of readers for the latest versions of standards related to valves and related industries, the National Valve Standardization Technical Committee, in collaboration with China Standards Press (China Quality Inspection Press), has compiled and published \"Compilation of Standards of China’s Machinery Industry – Valves Volume (4th Edition)\". This volume compiles the current valve-related standards that were approved and issued as of the end of December 2011. Compared to the third edition, this volume has undergone significant changes; it covers a wider range of topics and includes more comprehensive standards, thus ensuring it can better meet the needs of readers. This volume is divided into three parts: upper, middle, and lower. Volume 1 covers fundamentals, materials, testing, and inspection; it includes a total of **30 standards and 20 mechanical industry standards ； The middle volume contains general products, with a total of **29 standard specifications and 14 mechanical industry standards included ； The second volume covers specialized products and components, including **13 standards and 38 mechanical industry standards. I. Since the publication of this Standard Compilation, 8 standards have been revised; see the table of contents for details. II. The author has compiled the table of contents of the Compilation and attached it below for the benefit of netizens.
This post was last edited by nj1952 on 2017-7-6 at 23:26. Table of Contents for “Compilation of Standards for China’s Machinery Industry – Valves Volume (4th Edition)”
I. Basics
GB/T 1047-2005 Definition and selection of DN (nominal size) for pipe components
GB/T 1048-2005 Definition and selection of PN (nominal pressure) for pipe components
GB/T 12220-2015 Industrial valves – Marking (replaces GB/T 12220-1989)
GB/T 12221-2005 Metal valves – Structural length
GB/T 12222-2005 Connection of multi-turn valve actuation devices
GB/T 12223-2005 Connection of partially turned valve actuation devices
GB/T 12224-2015 Steel valves – General requirements (replaces GB/T 12224-2005)
GB/T 12247-2015 Steam traps – Classification (replaces GB/T 12247-1989)
GB/T 12250-2005 Steam traps – Terms, marking, structural length
GB/T 12712-1991 Technical management requirements for condensate recovery and steam traps in steam heating systems
GB/T 21465-2008 Valves – Terms
GB/T 22652-2008 Process qualification for welding of valve sealing surfaces
GB/T 24919-2010 Industrial valves – General requirements for installation, use, and maintenance
GB/T 24921.1-2010 Dimension determination, selection, and installation of pressure relief valves for the petrochemical industry – Part 1: Dimension determination and selection
GB/T 24921.2-2010 Dimension determination, selection, and installation of pressure relief valves for the petrochemical industry – Part 2: Installation
GB 26640-2011 Specification for minimum wall thickness requirements of valve housings
JB/T 106-2004 Marking and painting of valves
JB/T 308-2004 Method for naming valves
II. Materials
GB/T 12225-2005 Technical requirements for copper alloy castings used in general valves
GB/T 12226-2005 Technical requirements for gray cast iron parts used in general valves
GB/T 12227-2005 Technical requirements for ductile iron parts used in general valves
GB/T 12228-2006 Technical requirements for carbon steel forgings used in general valves
GB/T 12229-2005 Technical requirements for carbon steel castings used in general valves
GB/T 12230-2005 Technical requirements for stainless steel castings used in general valves
JB/T 5300-2008 Guidelines for selecting materials for industrial valves
JB/T 7248-2008 Technical requirements for low-temperature steel castings used in valves
JB/T 7927-2014 Appearance quality requirements for valve cast steels (replaces JB/T 7927-1999)
III. Testing and Inspection
GB/T 12242-2005 Test specifications for performance of pressure release devices
GB/T 12245-2006 Test methods for performance of pressure reducing valves
GB/T 12251-2005 Test methods for steam traps
GB/T 13927-2008 Pressure testing of industrial valves
GB/T 26479-2011 Fire resistance test for elastomeric-sealed partially turned valves
GB/T 26480-2011 Inspection and testing of valves
GB/T 26481-2011 Leakage test for valves
GB/T 26482-2011 Fire resistance test for check valves
JB/T 6439-2008 Magnetic particle inspection of pressure-bearing parts of valves
JB/T 6440-2008 Radiographic inspection of pressure-bearing cast steels for valves
JB/T 6902-2008 Liquid penetrant inspection for valves
JB/T 6903-2008 Ultrasonic inspection of forged steel parts for valves
JB/T 8858-2004 Procedure for static pressure life testing of gate valves
JB/T 8859-2004 Procedure for static pressure life testing of globe valves
JB/T 8860-2004 Procedure for static pressure life testing of plug valves
JB/T 8861-2004 Procedure for static pressure life testing of ball valves
I. Basics
GB/T 1047-2005 Definition and selection of DN (nominal size) for pipe components
GB/T 1048-2005 Definition and selection of PN (nominal pressure) for pipe components
GB/T 12220-2015 Industrial valves – Marking (replaces GB/T 12220-1989)
GB/T 12221-2005 Metal valves – Structural length
GB/T 12222-2005 Connection of multi-turn valve actuation devices
GB/T 12223-2005 Connection of partially turned valve actuation devices
GB/T 12224-2015 Steel valves – General requirements (replaces GB/T 12224-2005)
GB/T 12247-2015 Steam traps – Classification (replaces GB/T 12247-1989)
GB/T 12250-2005 Steam traps – Terms, marking, structural length
GB/T 12712-1991 Technical management requirements for condensate recovery and steam traps in steam heating systems
GB/T 21465-2008 Valves – Terms
GB/T 22652-2008 Process qualification for welding of valve sealing surfaces
GB/T 24919-2010 Industrial valves – General requirements for installation, use, and maintenance
GB/T 24921.1-2010 Dimension determination, selection, and installation of pressure relief valves for the petrochemical industry – Part 1: Dimension determination and selection
GB/T 24921.2-2010 Dimension determination, selection, and installation of pressure relief valves for the petrochemical industry – Part 2: Installation
GB 26640-2011 Specification for minimum wall thickness requirements of valve housings
JB/T 106-2004 Marking and painting of valves
JB/T 308-2004 Method for naming valves
II. Materials
GB/T 12225-2005 Technical requirements for copper alloy castings used in general valves
GB/T 12226-2005 Technical requirements for gray cast iron parts used in general valves
GB/T 12227-2005 Technical requirements for ductile iron parts used in general valves
GB/T 12228-2006 Technical requirements for carbon steel forgings used in general valves
GB/T 12229-2005 Technical requirements for carbon steel castings used in general valves
GB/T 12230-2005 Technical requirements for stainless steel castings used in general valves
JB/T 5300-2008 Guidelines for selecting materials for industrial valves
JB/T 7248-2008 Technical requirements for low-temperature steel castings used in valves
JB/T 7927-2014 Appearance quality requirements for valve cast steels (replaces JB/T 7927-1999)
III. Testing and Inspection
GB/T 12242-2005 Test specifications for performance of pressure release devices
GB/T 12245-2006 Test methods for performance of pressure reducing valves
GB/T 12251-2005 Test methods for steam traps
GB/T 13927-2008 Pressure testing of industrial valves
GB/T 26479-2011 Fire resistance test for elastomeric-sealed partially turned valves
GB/T 26480-2011 Inspection and testing of valves
GB/T 26481-2011 Leakage test for valves
GB/T 26482-2011 Fire resistance test for check valves
JB/T 6439-2008 Magnetic particle inspection of pressure-bearing parts of valves
JB/T 6440-2008 Radiographic inspection of pressure-bearing cast steels for valves
JB/T 6902-2008 Liquid penetrant inspection for valves
JB/T 6903-2008 Ultrasonic inspection of forged steel parts for valves
JB/T 8858-2004 Procedure for static pressure life testing of gate valves
JB/T 8859-2004 Procedure for static pressure life testing of globe valves
JB/T 8860-2004 Procedure for static pressure life testing of plug valves
JB/T 8861-2004 Procedure for static pressure life testing of ball valves
IV. General-purpose products
GB/T 4213-2008 Pneumatic control valves
GB/T 8464-2008 Valves with threaded iron and copper connections
GB/T 10869-2008 Control valves for power plants
GB/T 12232-2005 General-purpose valves – Iron gate valves with flange connections
GB/T 12233-2006 General-purpose valves – Iron stop valves and lift-type check valves
GB/T 12234-2007 Steel gate valves with stud-connected valve covers for use in the oil and gas industry
GB/T 12235-2007 Steel stop valves and lift-type check valves for use in the oil, petrochemical, and related industries
GB/T 12236-2008 Steel swing check valves for use in the oil, chemical, and related industries
GB/T 12237-2007 Steel ball valves for use in the oil, petrochemical, and related industries
GB/T 12238-2008 Butterfly valves with elastic seals for flange and wafer connections
GB/T 12239-2008 Industrial valves – Metal diaphragm valves
GB/T 12240-2008 Iron plug valves
GB/T 12241-2005 Safety valves – General requirements
GB/T 12243-2005 Safety valves with direct spring loading
GB/T 12244-2006 Pressure relief valves – General requirements
GB/T 12246-2006 Pilot-operated pressure relief valves
GB/T 13932-1992 Swing check valves made of iron (replaces GB/T 13932-1992)
GB/T 14173-2008 Specifications for the manufacturing, installation, and acceptance of steel gates in water conservancy and hydropower projects
GB/T 19672-2005 Pipeline valves – Technical requirements
GB/T 21385-2008 Ball valves with metal seals
GB/T 21386-2008 Proportional pressure relief valves
GB/T 21387-2008 Axial flow check valves
GB/T 22130-2008 Steel plug valves
GB/T 22654-2008 Steam traps – Technical requirements
GB/T 23300-2009 Plate gate valves
GB/T 24920-2010 Steel pressure relief valves for use in the petrochemical industry
GB/T 24924-2010 Butterfly valves with elastic seals for use in water supply systems
GB/T 24925-2010 Low-temperature valves – Technical requirements
GB/T 26144-2010 Steel butterfly valves lined with fluoroplastic for flange and wafer connections
JB/T 7746-2006 Compact steel valves
JB/T 7747-2010 Needle-type stop valves
JB/T 8219-2016 Ordinary and intelligent electric actuators for industrial process control systems (replaces JB/T 8219-1999)
JB/T 8527-2015 Butterfly valves with metal seals (replaces JB/T 8527-1997)
JB/T 8531-2013 Technical requirements for manual valve operating devices (replaces JB/T 8531-1997)
JB/T 8864-2004 Technical requirements for pneumatic valve operating devices
JB/T 8937-2010 Wafer-type check valves
JB/T 9624-1999 Safety valves for power plants – Technical requirements
GB/T 4213-2008 Pneumatic control valves
GB/T 8464-2008 Valves with threaded iron and copper connections
GB/T 10869-2008 Control valves for power plants
GB/T 12232-2005 General-purpose valves – Iron gate valves with flange connections
GB/T 12233-2006 General-purpose valves – Iron stop valves and lift-type check valves
GB/T 12234-2007 Steel gate valves with stud-connected valve covers for use in the oil and gas industry
GB/T 12235-2007 Steel stop valves and lift-type check valves for use in the oil, petrochemical, and related industries
GB/T 12236-2008 Steel swing check valves for use in the oil, chemical, and related industries
GB/T 12237-2007 Steel ball valves for use in the oil, petrochemical, and related industries
GB/T 12238-2008 Butterfly valves with elastic seals for flange and wafer connections
GB/T 12239-2008 Industrial valves – Metal diaphragm valves
GB/T 12240-2008 Iron plug valves
GB/T 12241-2005 Safety valves – General requirements
GB/T 12243-2005 Safety valves with direct spring loading
GB/T 12244-2006 Pressure relief valves – General requirements
GB/T 12246-2006 Pilot-operated pressure relief valves
GB/T 13932-1992 Swing check valves made of iron (replaces GB/T 13932-1992)
GB/T 14173-2008 Specifications for the manufacturing, installation, and acceptance of steel gates in water conservancy and hydropower projects
GB/T 19672-2005 Pipeline valves – Technical requirements
GB/T 21385-2008 Ball valves with metal seals
GB/T 21386-2008 Proportional pressure relief valves
GB/T 21387-2008 Axial flow check valves
GB/T 22130-2008 Steel plug valves
GB/T 22654-2008 Steam traps – Technical requirements
GB/T 23300-2009 Plate gate valves
GB/T 24920-2010 Steel pressure relief valves for use in the petrochemical industry
GB/T 24924-2010 Butterfly valves with elastic seals for use in water supply systems
GB/T 24925-2010 Low-temperature valves – Technical requirements
GB/T 26144-2010 Steel butterfly valves lined with fluoroplastic for flange and wafer connections
JB/T 7746-2006 Compact steel valves
JB/T 7747-2010 Needle-type stop valves
JB/T 8219-2016 Ordinary and intelligent electric actuators for industrial process control systems (replaces JB/T 8219-1999)
JB/T 8527-2015 Butterfly valves with metal seals (replaces JB/T 8527-1997)
JB/T 8531-2013 Technical requirements for manual valve operating devices (replaces JB/T 8531-1997)
JB/T 8864-2004 Technical requirements for pneumatic valve operating devices
JB/T 8937-2010 Wafer-type check valves
JB/T 9624-1999 Safety valves for power plants – Technical requirements
This post was last edited by nj1952 on 2017-7-6 at 23:25.
V. Specialized Products
GB 7512-2006 – Liquefied petroleum gas cylinder valves
GB 10879-2009 – Dissolved acetylene cylinder valves
GB 15382-2009 – General technical requirements for cylinder valves
GB 15930-2007 – Fire-resistant valves for building ventilation and smoke exhaust systems
GB/T 20910-2007 – Temperature and pressure safety valves for hot water systems
GB/T 21384-2008 – Safety valves for electric water heaters
GB/T 22653-2008 – Emergency shut-off valves for liquefied gas equipment
GB/T 24917-2010 – Eyewash valve
GB/T 24918-2010 – Emergency shut-off valves for low-temperature media
GB/T 26145-2010 – Sewage discharge valves
GB/T 26146-2010 – Eccentric hemispherical valves
GB/T 26478-2011 – Globe valves and lift check valves for ammonia
JB/T 6441-2008 – Safety valves for compressors
JB/T 7550-2007 – Switching butterfly valves for air separation equipment
JB/T 10529-2005 – Technical specifications for ceramic-sealed valves
JB/T 10530-2005 – Globe valves for oxygen
JB/T 10673-2006 – Swing-type metal-sealed valves
JB/T 10674-2006 – Hydraulic control valves
JB/T 10675-2006 – Sleeve valves for water
JB/T 11057-2010 – Technical specifications for rotary valves
VI. Components
GB/T 26147-2010 – Technical specifications for ball valves’ balls
JB/T 93-2008 – Valve components: wrenches, handles, and handwheels
JB/T 1700-2008 – Valve components: nuts, bolts, and plugs
JB/T 1701-2010 – Valve components: stem nuts
JB/T 1702-2008 – Valve components: shaft pressure covers
JB/T 1703-2008 – Valve components: bushings
JB/T 1708-2010 – Valve components: packing compressors, packing sleeves, and packing plates
JB/T 1712-2008 – Valve components: packing and packing gaskets
JB/T 1718-2008 – Valve components: gaskets and retaining washers
JB/T 1726-2008 – Valve components: disc covers and split rings
JB/T 1741-2008 – Valve components: pistons
JB/T 1749-2008 – Valve components: ammonia valve discs
JB/T 1754-2008 – Valve components: joint assemblies
JB/T 1757-2008 – Valve components: collets and collet nuts
JB/T 1759-2010 – Valve components: shaft sleeves
JB/T 2768-2010 – Valve components: dimensions of high-pressure pipes, fittings, and valve ends
JB/T 2769-2008 – Valve components: high-pressure threaded flanges
JB/T 2772-2008 – Valve components: high-pressure blind flanges
JB/T 2776-2010 – Valve components: high-pressure lens gaskets
JB/T 2778-2008 – Valve components: temperature markings for high-pressure fittings and fasteners
JB/T 5208-2008 – Valve components: spacers
JB/T 5210-2010 – Valve components: upper sealing seats
V. Specialized Products
GB 7512-2006 – Liquefied petroleum gas cylinder valves
GB 10879-2009 – Dissolved acetylene cylinder valves
GB 15382-2009 – General technical requirements for cylinder valves
GB 15930-2007 – Fire-resistant valves for building ventilation and smoke exhaust systems
GB/T 20910-2007 – Temperature and pressure safety valves for hot water systems
GB/T 21384-2008 – Safety valves for electric water heaters
GB/T 22653-2008 – Emergency shut-off valves for liquefied gas equipment
GB/T 24917-2010 – Eyewash valve
GB/T 24918-2010 – Emergency shut-off valves for low-temperature media
GB/T 26145-2010 – Sewage discharge valves
GB/T 26146-2010 – Eccentric hemispherical valves
GB/T 26478-2011 – Globe valves and lift check valves for ammonia
JB/T 6441-2008 – Safety valves for compressors
JB/T 7550-2007 – Switching butterfly valves for air separation equipment
JB/T 10529-2005 – Technical specifications for ceramic-sealed valves
JB/T 10530-2005 – Globe valves for oxygen
JB/T 10673-2006 – Swing-type metal-sealed valves
JB/T 10674-2006 – Hydraulic control valves
JB/T 10675-2006 – Sleeve valves for water
JB/T 11057-2010 – Technical specifications for rotary valves
VI. Components
GB/T 26147-2010 – Technical specifications for ball valves’ balls
JB/T 93-2008 – Valve components: wrenches, handles, and handwheels
JB/T 1700-2008 – Valve components: nuts, bolts, and plugs
JB/T 1701-2010 – Valve components: stem nuts
JB/T 1702-2008 – Valve components: shaft pressure covers
JB/T 1703-2008 – Valve components: bushings
JB/T 1708-2010 – Valve components: packing compressors, packing sleeves, and packing plates
JB/T 1712-2008 – Valve components: packing and packing gaskets
JB/T 1718-2008 – Valve components: gaskets and retaining washers
JB/T 1726-2008 – Valve components: disc covers and split rings
JB/T 1741-2008 – Valve components: pistons
JB/T 1749-2008 – Valve components: ammonia valve discs
JB/T 1754-2008 – Valve components: joint assemblies
JB/T 1757-2008 – Valve components: collets and collet nuts
JB/T 1759-2010 – Valve components: shaft sleeves
JB/T 2768-2010 – Valve components: dimensions of high-pressure pipes, fittings, and valve ends
JB/T 2769-2008 – Valve components: high-pressure threaded flanges
JB/T 2772-2008 – Valve components: high-pressure blind flanges
JB/T 2776-2010 – Valve components: high-pressure lens gaskets
JB/T 2778-2008 – Valve components: temperature markings for high-pressure fittings and fasteners
JB/T 5208-2008 – Valve components: spacers
JB/T 5210-2010 – Valve components: upper sealing seats