Code for Safety Inspection of Pressure Piping – Utility Piping, Power Piping, Long-Distance Piping
Thread Content
So far only the \"Regulations on Safety Inspection of Pressure Pipelines – Industrial Pipelines\" has been found; are the other three sets of regulations regarding safety inspection of pressure pipelines – namely those for utility pipelines, power pipelines, and long-distance pipelines – still under development by the General Administration of Quality Supervision, Inspection and Quarantine? I would appreciate some guidance from experts, thank you! Similarly, for pressure pipelines, there is only GB/T 20801 for industrial pipelines; are there any corresponding standards for other types of pipelines?
I am aware that safety technical regulations are being developed for various pressure pipelines. The codes for pressure pipelines, equivalent to GBT20801 for long-distance pipelines, as well as those for power pipelines, have been published and put into use. You can look up the corresponding standard number
After checking, it is true that standards for pressure pipelines in long-distance pipelines and power pipelines have already been issued; standards for pressure pipelines in utility pipelines are currently being developed. However, I personally think that relevant safety inspection regulations for pressure pipelines should be issued first Please give me some advice. Thank you! GB/T 20801 \"Code for pressure pipelines – Industrial pipelines\" GB/T 34275 \"Code for pressure pipelines – Long-distance pipelines\" GB/T 32270 \"Code for pressure pipelines – Power pipelines\"
It would be better to learn some materials on it*
The draft regulations on safety inspection for pressure pipelines in 2014 already include long-distance pipelines and utility pipelines; in the future, all pressure pipelines will be governed by a single set of safety inspection regulations
I have the same doubt; it seems that the latest version of the safety inspection regulations should cover all pipelines
I learned later that the safety inspection regulations for pressure pipelines, which are set to be upgraded in the future, will still need to be issued separately. Thank you!
Huh? So is it still only the TSG D0001-2009 Code for Safety Inspection of Pressure Piping – Industrial Piping?
I’m a bit confused; it’s too chaotic, and there’s no consistency among the various standards