Self-supporting steam pressure reducing valve
Thread Content
What are the requirements for installing a stand-alone steam pressure regulator? Is it necessary to do handstands?
The stand-alone steam pressure relief valve does not need to be inverted during installation. The main requirements include: 1. Ensure that the arrow on the valve body is aligned with the flow direction of the fluid. 2. There should be sufficient straight pipe sections before and after installation. 3. Avoid staying near elbows or other fluid disturbance devices. 4. Ensure a location that is easy to maintain and service. 5. Prevent the effects of vibration and shock loads. .
Can a stand-alone pressure relief valve be installed in reverse as well?
When installing self-acting control valves, different installation methods can be employed depending on the type of medium. When the valve is used in steam or high-viscosity liquid media, the self-acting pressure regulator is usually installed upside down on a horizontal pipe. This installation method requires that the condenser (self-acting for steam) be above the actuator of the pressure regulating valve and below the piping before and after the valve.