Are there high-pressure pressure reducers with a DN50 or larger size, an inlet pressure of 40 MPa, and an outlet pressure of 15 MPa?
Thread Content
This post was last edited by A Chao syc62100 on 2019-5-8 21:25. Question for industry professionals: Are there high-pressure, high-flow pressure regulators with an inlet pressure of 40 MPa, an outlet pressure of 15 MPa, and a diameter of DN50 or larger? Please recommend a medium: air or nitrogen. Thank you!
STNC Sonotech high-pressure pressure relief valve/high-pressure pressure regulating valve TYH-25, with a pressure resistance of 3.6 MPA (TYH-25); give it a try on Baoshang.
We can do it; with such high pressure, forging is required.
A high-pressure control valve can be used, but the pressure is indeed a bit high
The pressure is high; the pressure difference is generally moderate for the valves we use
As mentioned above, the high-pressure control valve can meet the requirements