Elephant ant legs
Thread Content
In a certain workshop, there are 10-cubic-meter tanks with a height of 10 meters. It was specified that no intermediate platform should be added; instead, very thick custom-made legs were used to secure the tanks to the ground. However, the foundation bolts used were of conventional design and quite small in size.
Send the photos over for joint identification.
My first impression is that the designers were particularly principled on this point, hehe
Foundation bolts are primarily subjected to tensile forces and shear stresses; if there are wind loads in outdoor environments, larger bolts should be used. The weight of the equipment is determined by the foundation, so it is not necessary for the legs and foundation bolts to be exactly matched