May I ask whether the branch pipes branching off from the main circulating water pipe should emerge from the lower part or the upper part of the pipe?
Thread Content
May I ask whether the branch pipes branching off from the main circulating water pipe should emerge from the lower part or the upper part of the pipe?
First, it is necessary to clarify the function of this pipe. If it is an exhaust pipe, it should be connected to the upper end; if it is water for production, it can be connected anywhere. It’s just a guess; it would be best to include a simple diagram for discussion, as a reference.
It is best to choose a nozzle with an opening at the top to prevent blockage by deposits in the circulating water main
I’m new to piping work, so I have questions about this son. Thank you
We started from the bottom, but later it became impossible to facilitate heat exchange, so we took a sample from the middle of the tube.
Uh, the texture didn’t apply. If you’re not sure, you can take a look at the distributors used for heating and heat exchange; just search for images on Baidu. Basically, it’s all done from above.
The upper opening is present; only the steam trap connection has a lower opening