Adhesive for wear-resistant ceramic tiles
Thread Content
Due to their good wear resistance and light weight, ceramic sheets are widely used in industries that require wear resistance. However, the problem of these sheets coming loose after being attached remains unresolved; sometimes this is due to excessive temperatures, and other times it is because the bonding strength is insufficient. After years of research and development, the company has produced ceramic adhesive AB to meet the requirements for on-site installation of wear-resistant ceramic tiles. Wear-resistant ceramic pipes, cyclones, air ducts, and dust collectors are used in power plants, steel mills, cement plants, and coal washing plants. Manufacturers of ceramic tile adhesive: How to apply ceramic tile adhesive for bonding ceramic tiles. There are many manufacturers of ceramic tile adhesive, and the quality of their products varies greatly. When choosing a ceramic tile adhesive, it is important to consider its viscosity; it should be around 20,000–40,000 mpa·s. Adhesives with such viscosity are easy to mix, do not flow during application, and prevent the ceramic tiles from slipping. The main component is a modified epoxy resin, which provides strong adhesion with no irritating odor. Suitable for large-scale application on ceramic tiles. The curing time for the ceramic tile adhesive is 40 minutes, with full curing taking 24 hours. The workpiece can generally be turned over after 1 hour of application, which makes the installation process more convenient, speeds up the bonding process, and improves the efficiency of workers.
This product is widely used for bonding wear-resistant ceramic tiles, especially on equipment in industries such as thermal power, steel manufacturing, smelting, machinery, coal, and mining, where severe wear occurs due to the impact of fine powders or slurry. It is particularly suitable for bonding wear-resistant ceramic sheets in high-temperature operating conditions. ★ Application of wear-resistant ceramic tiles in locations such as the coal grinder outlet pipes, the inner shell of the powder discharge machine, the dust removal systems in steel plants, and air duct elbows. ★ Ceramic wear-resistant linings can be applied to the inclined tube section at the outlet of ball mills as well as to the fan casings; they can also be used to attach wear-resistant ceramic tiles to hoppers, silos, and mine cars in steel plants and smelting facilities. ★ Application of wear-resistant ceramic tiles to equipment such as silos and hoppers in coal conveying and ash discharge systems, as well as in feeding and batching systems used in the metallurgy and steel industry. It is also suitable for bonding and repairing mechanical parts under high-temperature conditions.