Layout of belt-type alkali filter
Thread Content
Does anyone know if there are any special height requirements for the two tanks that come with the belt-type alkali removal machine (the mother liquor separation tank and the wash water separation tank), as well as the ammonia purification tower that follows, in terms of equipment layout and piping arrangement? How do I calculate it? Thank you, expert
The filtrate tank and mother liquor tank are usually on the same floor as the filter machine, next to the liquid collection pipe. The net ammonia tower is generally located in front of the Roots vacuum pump, on the same ground level as it.
Check whether the tank has an automatic drainage function; those with this feature can be placed on top of the equipment, while those without it must be placed on the ground. The installation height of tanks equipped with filters should be no less than 10 meters
Belt-type alkali removal machines generally require the use of vacuum. The height of these two tanks must be such that the mother liquor or washing water inside can fall naturally; otherwise, if the height is insufficient, the liquid will be drawn away by the vacuum.