Automatic locking of the electrolyzer
Thread Content
That friend from Sichuan has the troubleshooting manual for the Asahi Kasei electrolyzer automatic locking device; let’s share it!
The automatic locking device actually maintains a 2mm gap between the locking nut under high oil pressure, to prevent the locking nut from locking up. There is no need to adjust the oil pressure when the tank temperature or load changes; the oil pressure is adjusted only after shutdown, after which the locking nut is tightened
Oh, I see! Therefore, this automatic locking device maintains a 2mm gap through high oil pressure, preventing the locking nut from getting stuck due to changes in temperature or load. During normal operation, there is no need to adjust the oil pressure; it is only after stopping that the oil pressure needs to be adjusted again to tighten the nut. Thank you for the explanation; now I understand much better! .