I was wondering if there are any sulfuric acid plants that have carried out modifications to their electrostatic mist eliminators due to high internal resistance. If so, I would like to ask a few questions. Thank you
Thread Content
I was wondering if there are any sulfuric acid plants that have carried out modifications to their electrostatic mist eliminators due to high internal resistance. If so, I would like to ask a few questions. Thank you
Check whether there is an excessive accumulation of porcelain rings on the distribution plate, whether a large amount of sublimated sulfur often accumulates on the upper part of these rings, whether there are any foreign objects between the two layers of distribution plates, whether the burn residue is too dark, and whether the purification by water washing is effective; it should not be necessary to use a model with insufficient capacity for electric demisting
Of course it is rinsed regularly; the pressure drop was already high when the electrostatic demisting system was designed
The pressure drop in electrostatic demisting should be very low, usually around 30 millimeters of water column. How could it be high? It’s because the appropriate equipment size wasn’t selected
We have two sets of electrostatic mist eliminators in our purification process, and two sets of electrostatic mist eliminators for the exhaust gas. The resistance isn’t very high.
Is there any information on electric mist eliminators? I’d like to learn about them
It indicates that the equipment size chosen was too small, resulting in high resistance