Check violations by looking at images (February 11, 2019 – First image of the month)
Thread Content
This post was last edited by Hasty Passerby on 2019-2-12 at 08:24. Wishing you and your family a happy Spring Festival and all the best! ! ! Note: 1. There are many violations and irregularities at the construction site or production site, which hinder stable and safe production. We hope everyone will point out the problems shown in the images and suggest improvements to help them enhance their work. Thank you for your participation and support! ! ! Photos of the on-site scaffolding: Reference list of improvement measures: 1. Add a short rod every other row at the joints. 2. Add horizontal crossbars. 3. Ensure that the scaffold planks are fitted tightly together with no gaps. 4. The outer upright posts are extended and connected to the guardrails. 5, 6: Add horizontal bars and hang the safety belts at a high position. 7. Lengthening of longitudinal horizontal bar butt joints (or lap joints). 8. Connect to the main node.
1. Add a short rod every other root at the joint. 2. Add horizontal crossbars. 3. Ensure that the scaffold planks are fitted tightly together with no gaps. 4. The outer upright posts are extended and connected to the guardrails. 5, 6: Add horizontal bars and hang the safety belts at a high position. 7. Lengthening of longitudinal horizontal bar butt joints (or lap joints). 8. Connect to the main node.
1. The top-level guardrails are not properly installed, so they do not provide effective protection. 2. Workers on the second level use their safety belts incorrectly; these belts should be fastened at a higher position. 3. The horizontal bars used to secure the scaffolding on the first level are positioned too low, which hinders the workers’ movement and activities. 4
No warning signs; people are sitting and resting; there is no supervisor; the gaps in the upper railing are large
1. Add a short rod every other root at the joint. 2. Add horizontal crossbars. 3. Ensure that the scaffold planks are fitted tightly together with no gaps. 4. The outer upright posts are extended and connected to the guardrails. 5, 6: Add horizontal bars and hang the safety belts at a high position. 7. Lengthening of longitudinal horizontal bar butt joints (or lap joints). 8. Connect to the main node.
1. The safety belt for working at heights was not hung high enough； 2. No baffle is installed at the working layer ； 3. No safety net is installed on the outer layer ； 4. The scaffolding is not properly secured, and its span is too large. 5. The spacing between the horizontal bars of the scaffolding is too large. 6. The scaffolding lacks ladders. 7. The planks of the scaffolding are fitted tightly together without any gaps. 8. No protection is provided at the location of the inner windows ； 9. Connect to the main node.
1. Add a short rod every other root at the joint. 2. Add horizontal crossbars. 3. Ensure that the scaffold planks are fitted tightly together with no gaps. 4. The outer upright posts are extended and connected to the guardrails. 5. No protection is provided at the location of the inner window. 6. Add horizontal bars to ensure the safety belt is hung at a high position. 7. Lengthening of longitudinal horizontal bar butt joints (or lap joints). 8. Connected to the main node
The scaffolding is not up to standard: it lacks crossbeams and bracing, and the fasteners are loose.
The clamping clip taken over is too close to the reinforcing clamping clip, and the intersecting pipes also need to be secured with clamping clips.