Manufacturer of ultra-pure water systems explains what to do in case of leaks after equipment installation

Thread Content

This post was last edited by hesonchang214 on 2020-3-23 at 10:30. 1. The installation components for ultra-pure water equipment are made up of multiple parts; if the order of these parts is incorrect during installation, this issue can occur. Therefore, it is important to note that during installation, one must strictly follow the instructions provided in the manual. If one is unable to install it themselves, they should hire professional staff to handle it. 　　2. Generally, the filter housings of ultra-pure water treatment equipment are made of plastic; if leakage occurs, it is necessary to check whether the flexible rubber rings in the filter housings are providing proper sealing. 　　3. Check whether the pipes of the ultrapure water system are connected tightly. If the ends of the pipes are not flat, they can be trimmed before being connected to the fittings; pulling them a few more times will help prevent leaks.