【Daily Discussion】Utilities - Mechanical & Electrical - 20200911
Thread Content
What are the steps involved in selecting a self-propelled crane? Feel free to participate actively in the discussions – the system offers generous rewards for answering questions from VIP members! ! !
Step 1: Determine the position of the crane based on the placement location of the equipment or components to be lifted, as well as the specific conditions at the site. Once the position of the station and the vehicle is determined, its amplitude is also determined ； Step 2: Based on the height at which the equipment or component to be lifted is to be placed, the dimensions of the equipment, the height of the slings, as well as the position of the crane and the load (radius of movement), the arm length of the crane is determined using its characteristic curve ； Step 3: Based on the aforementioned determined amplitude and arm length, and using the crane’s characteristic curve, determine the load that the crane is capable of lifting ； Step 4: If the load that the crane can lift is greater than the weight of the equipment or component to be lifted, then the crane is suitable; otherwise, select another crane.
(1) Determine the position of the crane based on the placement location of the equipment or components to be lifted, as well as the specific conditions at the site; once the position of the crane is determined, its reach is also determined. (2) The arm length is determined from the crane’s characteristic curve, based on factors such as the installation height of the equipment or components to be lifted, the dimensions of the equipment and the height of the slings, as well as the position (radius of movement) of the crane. (3) Based on the aforementioned determined amplitude and arm length, and using the crane’s characteristic curve, the load that the crane can lift is determined. (4) If the load that the crane can lift is greater than the weight of the equipment or component to be lifted, then the crane is considered suitable; otherwise, it needs to be selected again.
(1) Determine the position of the crane based on the placement location of the equipment or components to be lifted, as well as the specific conditions at the site; once the position of the crane is determined, its reach is also determined. (2) The arm length is determined from the crane’s characteristic curve, based on factors such as the installation height of the equipment or components to be lifted, the dimensions of the equipment and the height of the slings, as well as the position (radius of movement) of the crane. (3) Based on the aforementioned determined amplitude and arm length, and using the crane’s characteristic curve, the load that the crane can lift is determined. (4) If the load that the crane can lift is greater than the weight of the equipment or component to be lifted, then the crane is considered suitable; otherwise, it needs to be selected again.
(1) Determine the position of the crane based on the placement location of the equipment or components to be lifted, as well as the specific conditions at the site; once the position of the crane is determined, its reach is also determined. (2) The arm length is determined from the crane’s characteristic curve, based on factors such as the installation height of the equipment or components to be lifted, the dimensions of the equipment and the height of the slings, as well as the position (radius of movement) of the crane. (3) Based on the aforementioned determined amplitude and arm length, and using the crane’s characteristic curve, the load that the crane can lift is determined. (4) If the load that the crane can lift is greater than the weight of the equipment or component to be lifted, then the crane is considered suitable; otherwise, it needs to be selected again.
(1) Determine the position of the crane based on the placement location of the equipment or components to be lifted, as well as the specific conditions at the site; once the position of the crane is determined, its reach is also determined. (2) The arm length is determined from the crane’s characteristic curve, based on factors such as the installation height of the equipment or components to be lifted, the dimensions of the equipment and the height of the slings, as well as the position (radius of movement) of the crane. (3) Based on the aforementioned determined amplitude and arm length, and using the crane’s characteristic curve, the load that the crane can lift is determined. (4) If the load that the crane can lift is greater than the weight of the equipment or component to be lifted, then the crane is considered suitable; otherwise, it needs to be selected again.
(1) Determine the position of the crane based on the placement location of the equipment or components to be lifted, as well as the specific conditions at the site; once the position of the crane is determined, its reach is also determined. (2) The arm length is determined from the crane’s characteristic curve, based on factors such as the installation height of the equipment or components to be lifted, the dimensions of the equipment and the height of the slings, as well as the position (radius of movement) of the crane. (3) Based on the aforementioned determined amplitude and arm length, and using the crane’s characteristic curve, the load that the crane can lift is determined. (4) If the load that the crane can lift is greater than the weight of the equipment or components to be lifted, then the crane is suitable; otherwise, it needs to be selected again
(1) Determine the position of the crane based on the placement location of the equipment or components to be lifted, as well as the specific conditions at the site; once the position of the crane is determined, its reach is also determined. (2) The arm length is determined from the crane’s characteristic curve, based on factors such as the installation height of the equipment or components to be lifted, the dimensions of the equipment and the height of the slings, as well as the position (radius of movement) of the crane. (3) Based on the aforementioned determined amplitude and arm length, and using the crane’s characteristic curve, the load that the crane can lift is determined. (4) If the load that the crane can lift is greater than the weight of the equipment or component to be lifted, then the crane is considered suitable; otherwise, it needs to be selected again.
(1) Determine the position of the crane based on the placement location of the equipment or components to be lifted, as well as the specific conditions at the site; once the position of the crane is determined, its reach is also determined. (2) The arm length is determined from the crane’s characteristic curve, based on factors such as the installation height of the equipment or components to be lifted, the dimensions of the equipment and the height of the slings, as well as the position (radius of movement) of the crane. (3) Based on the aforementioned determined amplitude and arm length, and using the crane’s characteristic curve, the load that the crane can lift is determined. (4) If the load that the crane can lift is greater than the weight of the equipment or components to be lifted, then the crane is suitable; otherwise, it needs to be selected again