Questions about pool structure
Thread Content
Discuss with you: Because the temperature of the return water in the process part is too high, it is returned to the pool to cool down naturally. The temperature of the first pool is 60 degrees and has no structure at all. The temperature of the second pool is 54 degrees. There is a thick layer of ditch on the inner wall of the pool. As shown in the picture, why is there no scale on the first pool? Why is the structure of the second pool so powerful? Could it be because the temperature of the first pool is too high?
Crystallization is related to temperature and pressure. The quality of the pouring construction of this pool is adequate. If corrosive liquid invades the steel bars inside the pouring material and is corroded, it will be corroded.
Let’s analyze whether scale and moss are closely related to the water temperature. This temperature is suitable for scaling and moss growth. The pool behind is about 30°C and is completely clean.
Moss is an algae substance. If it is the same water quality, it should not only be related to temperature but also to residence time. ； If the water quality is different, then it is a different matter!