System resistance
Thread Content
When we purify the methane chemical processing unit and adjust the flow rates, what does it mean to take into account the system resistance? Experts, please explain it to me
How to calculate it? Please explain it to me, expert. How about adding me on QQ or WeChat? My QQ number is 1477584125
How is the reduction calculated in this case? Will there be an increase in resistance when verifying the reduction? There’s a concern that, during the reduction process, some valve might be activated, or there could be blockages or other issues that cause the system resistance to exceed expectations and deviate from normal operating conditions
How is the reduction calculated in this case? Will there be an increase in resistance when verifying the reduction? There’s a concern that, during the reduction process, some valve might be activated, or there could be blockages or other issues that cause the system resistance to exceed expectations and deviate from normal operating conditions
From my personal experience, it’s better not to consider too many influencing factors; otherwise, you won’t be able to make adjustments. Check the data before the adjustment, and then check the data after it; the modified data is used as a reference value for adjustments, and it’s difficult to determine this exact value through calculations. I hope this can help you.