New technology – LIBS2500 laser elemental analyzer

Thread Content

The LIBS2500 laser composition analyzer is an online composition analysis system used for the rapid detection of the composition of materials conveyed on conveyor belts. The system features an integrated design of the detection probe and control cabinet, with built-in functions such as automatic control of detection distance, protection against dust and fumes, monitoring of the material status during detection, automatic temperature adjustment, and one-click operation for local/remote use. This enables fast and highly accurate detection of the composition of materials over long distances. ● Designed for online detection of the composition of materials conveyed by belt conveyors; ● Simultaneous detection of multiple elements; ● In-situ online detection, eliminating the need for manual sampling and sample preparation; ● Rapid detection and analysis – composition information can be obtained in about 30 seconds; ● One-click operation for local/remote use, with intelligent scheduled testing, requiring no human supervision; ● Environmentally friendly and safe, without any radiation sources or toxic substances; ● Suitable for industrial environments, featuring dust protection, heat insulation, and electromagnetic shielding capabilities. Key parameters: System model – GS-LIBS2500 Laser Element Analysis Instrument; Detection principle – Laser-induced breakdown spectroscopy; Samples that can be analyzed – Solids, melts; Elements that can be detected – Those with a concentration of greater than 0.1% (depending on detection conditions); Detection range – 1 m to 4 m (depending on detection conditions); Quantitative accuracy – Relative error of 2% to 10% (depending on detection conditions); Operation mode – Local control, remote control; Dimensions of the detection system – 92 cm × 72 cm × 80 cm, weight – ~200 Kg; Software provided – LIBS InsightEye; Required utility conditions – Power supply: AC220V±10%, 1500 W; Additional requirements – Cooling gas (compressed air at >0.6 MPa), cooling water (circulating water); Maintenance tasks – Regular calibration of the equipment ； Optical component cleaning ；