What could be the cause of smoke coming from the pump motor wiring box in the oil station of a compressor unit?
Thread Content
The last edit to this post was made by simplyme on 2017-10-25 at 15:16. What could be the cause of smoke coming from the pump and motor wiring box in the compressor unit’s oil station?
Have an electrician conduct a thorough inspection. Possible causes: 1. The supply voltage is not at the required level, causing the motor to heat up too quickly under rated load； 2. The influence of the motor’s operating environment, such as high humidity and other factors ； 3. Motor overload or single-phase operation ； 4. Motor startup failure, excessive forward and reverse rotation.
Oil and gas are brought in from the tank via the pump
Oil and gas are brought from the tank to the motor junction box via the pump