I would like some advice regarding compressor selection
Thread Content
Our company currently has a small technical improvement project aimed at recovering argon gas, and for this purpose we need a compressor to compress argon gas at atmospheric pressure (with an inlet pressure of up to around 50 kPa) to 2.5 MPa. Since it is recycled gas, the pressure during recovery is unstable; the inlet pressure might drop below 2 kPa in short periods of time. The volume flow rate required is roughly 100–200 m3/h. I would like to ask the experts: what type of compressor is suitable for such operating conditions? What would the approximate price be? Additionally, it is ideal if the compressor can draw in a negative pressure; from a technical standpoint, it is required that no oil or other contaminants remain after the compressor has completed its operation.
You can cooperate with our company; we will design it for you according to your requirements