Domestic transformation and repair of reciprocating compressors
Thread Content
The imported compressor, manufactured in 1981, had been in operation for 34 years before being shut down for 2 years. After half a year of localization-based repair and renovation, the equipment was put back into operation! It is expected to operate for at least another 20 years! Youth is a state of being, while vitality is the driving force! Let’s work together to awaken more dormant devices! —To my young colleagues
Why is the compressor enclosed with a guard rail
Modification of unloading devices, modification of the injection system, localization of wear-prone and critical components, etc
The compressor is located on the second floor of the factory building; the floor beneath the compressor is empty, and it has been enclosed to prevent any hazards.
It does not affect maintenance; the height and extent of the fence have no impact on the insertion and extraction of the piston rod or on the disassembly and assembly of the air valves. If it is necessary to remove the cylinder, the fence can be taken away, and it can be reinstalled after the maintenance is complete.
It should be the auxiliary fuel line system that has been moved from the second-level platform to below
It’s best to explain the details of the modifications in detail
The details of on-site modifications vary; they are all determined based on the actual needs of the site. Examples include increasing production capacity, localizing imported equipment, implementing energy-saving upgrades, fixing faults, and repairing outdated equipment – ultimately, it depends on the requirements of the client.
Not bad, work done, materials used up, site cleaned~~~