High noise and malfunction of centrifuge
Thread Content
The bearing is broken. Work hard, hehe.
The picture is good; adding some textual description would make it a great post! :lol
Is the bearing lacking oil, is it spinning out of control, or what else could be causing the problem?:)
Uneven fabric distribution causes vibration in the centrifuge; the original machine rules out the possibility of counterfeit bearings
Bears end up in this condition mostly due to a lack of oil
The 5S situation here is really not impressive, hahaha. Maintenance is gradually moving toward greater precision and standardization. It is recommended to establish a system
Don’t wear those gloves when repairing it; otherwise, debris will get inside and the bearings will get damaged again