Lithium bromide unit maintenance

Haiyou is welcome to propose solutions and technical services.

This is the corrosion product caused by the corrosion of the lithium bromide solution at the bottom of the absorber to the inside of the unit. The main reason is that the rust unit has corroded to this extent, and there is also a lot of dirt inside each heat exchanger. Rinse the unit yourself, and be careful not to use tap water! Be sure to use deionized water and add a corrosion inhibitor. The corrosion inhibitor must be consistent with the original corrosion inhibitor of the solution. It is best to have a vacuum liquid storage tank, use the solution to enter the circulation of the unit, and repeatedly release and precipitate. This method takes a long time, but is relatively safe. It is not recommended to carry out so-called inner cavity cleaning. Improper cleaning will only aggravate corrosion. Lithium bromide equipment cannot be repaired, but must be maintained. The front of your unit is not well maintained.

China Lithium Mechanical and Electrical, Lithium Bromide professional maintenance company, 13706468868 It is indeed not maintained well. Therefore, a new canned pump was added this year to flush the heat exchanger.