Regarding the calculation issues for EHB end caps

2014-12-31View Original

Thread Content

When calculating the thickness of EHB heads, it should be based on the outer diameter. When using SE6 for calculations, if it is required to enter the depth of the head’s curved surface, simply enter the value of the outer curved surface design. For example, when using SW6 to calculate EHB219 heads, select the outer diameter as the basis in the main calculation parameters, specifying an outer diameter of 219; in the head data entry section, the depth of the head’s outer curved surface should be set at 55. This is because for EHB heads, the outer surface is a standard ellipse while the inner surface is not; for EHA heads, the inner surface is a standard ellipse while the outer surface is not.

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.

Regarding the calculation issues for EHB end caps

Thread Content

Related Threads in This Forum

← Previous

Next →

Submit a Project

Disclaimer

Quick Links