Steam distribution cylinder design
Thread Content
The company needs to add a steam distribution cylinder with an inlet diameter of DN300, and outlet pipes with diameters of DN200, DN50, DN80, DN100, DN250, DN50. There should also be a drain port with a diameter of DN25, as well as 2 level gauge ports with a diameter of DN20. Could any kind-hearted member help design this steam distribution cylinder? Thanks first! ! ! :handshake:handshake
This may require HaiChuan coins.
What is Haichuan Coin used for? Do you want to top up?
Where did you buy it? If it can’t be fixed by the seller, do you have to fix it yourself? Is this considered a pressure vessel?
I’m not sure whether your company is a user of cylinder separators or a manufacturing unit?
We are the user unit; this is considered a pressure vessel
The last edit to this post was made by 515133307 on 2017-7-15 at 08:26, specifying the requirements regarding pressure, medium temperature, and the orientation of the pipe ends. If I have time, I can help you with this. Also, since the volume of such a cylinder is not large, is a level gauge still necessary? Do you want to do it standing up?
Pressure: 0.8–1.0 MPa, temperature: 185–250°C; maximum steam consumption: 40 t/h. The orientation of the pipe outlets is as specified in the order given earlier. Thank you in advance for your help
Only entities with design permits can carry out design work, and a fee is required.
Do we need to manufacture it? It can be packaged and completed: lol
It needs to be manufactured. Could you leave your contact information?