How to select explosion-proof plates for coking dust collection bins, and how to calculate the blast pressure for self-made aluminum explosion-proof plates?
Thread Content
Due to my own professional limitations, the formulation of the questions may not be clear; I earnestly ask for your expert guidance! ! !
It depends on the diameter, pressure, temperature, and whether it’s circular or square . Determine the design pressure based on whether it is an explosion or physical overpressure. If the pressure is low, aluminum with a thickness of perhaps 0.2 mm or less is required (depending on the diameter); it is difficult to manufacture such material, and usually thick plates are used with gaps filled in with sealing film. It’s quite difficult to determine the thickness by testing it oneself; it’s better to buy one from the manufacturer, follow their instructions for measurement, and you can drill holes or cut it with a knife – the pressure difference will be minimal.