According to NB/T47065.2-2018, Container supports: Horizontal tanks are equipped with saddles; are legs required?
Thread Content
According to NB/T47065.2-2018 \"Container supports: Leg-type supports\", it can be seen that horizontal tanks (containers) do not have legs, only saddles?
The idea is unique; it needs to be designed by oneself.
As long as the calculation is correct. Customer approval. OK
If leg supports are used, how is the local stress calculated?
I mean that the Quanli horizontal container model doesn’t have legs; it only has a saddle； The selection of the saddle can be determined directly based on the inner diameter of the tank (DN****); it seems that the standard does not take into account the length of the tank.
There are standards for design; it’s not possible to make it as long as you want. These standards have already taken such things into account
Why use leg-type supports in horizontal containers?
This post was last edited by All the best_DTSP on 2019-7-20 08:19. For the convenience of piping, I’m wondering if there are any standards or whether it is allowed (or prohibited).