The device’s appearance is abnormal; please have a professional take a look
Thread Content
I would like to ask experienced professionals to help analyze what might have happened to the equipment on site to cause it to end up in this state
If it’s the paint that’s cracked, remove it and check what’s inside; if it’s the expansion joint that’s cracked, then it needs to be replaced.
The expansion joint isn’t cracked~ The paint on the outside is dark; I just want to know whether this kind of situation can occur under normal conditions of storage. If it has been exposed to fire, what impact will that have on the equipment itself?
Do a UT test to check for cracks in the weld.
For safety reasons, it is recommended that the poster conduct a UT test. Check for any cracks.
It’s possible that refurbished used equipment was purchased
Looking at the picture, it seems this area has been exposed to high temperatures, right? Under the effects of pressure and high temperature, bulging deformation may occur; the thickness at this area should be checked. No deformation indicates that everything is normal, with only cracks in the paint surface. For reference.
This shouldn’t… There are no issues with the factory inspection and delivery
Mm... the concern is that the structure of the device might be damaged