Oil tank foundation settlement experiment
Thread Content
I’m seeking recommendations from experts regarding methods for conducting foundation settlement tests. At present, the storage tanks in our tank farm have not yet been built, but the foundations are already in place. Is there any way to carry out settlement tests on these foundations without the tanks being installed yet?
How can there be settlement without an installed tank foundation? Additionally, the foundation elevation markings should be present on the ring beam of the tank foundation.
Simulate the same weight distribution to see if it has an impact! It may not be the same as actual operation.
Simulate the same weight distribution to see if it has an impact! It may not be the same as actual operation.
The foundation itself settles; after the tank is installed, water is poured in to conduct settlement testing
Wu: Can something else be used in place of it? Answer: If you really want to do it, you can refer to the attached diagrams; however, it is necessary to calculate the load capacity, determine the planar distribution of the loads, and set the time for the static load test. @Five
There are settlement observations of the foundation itself; of course, settlement occurs at such times, which indicates that there is a problem
This is on par with the bulletproof vest owner’s