Is the certification exam for pressure vessel auditors currently held in Jiangsu or nationwide?
Thread Content
As mentioned above, I would like to ask for some advice; I work in Jiangsu. There are two ways to register: ① For those in Jiangsu: Jiangsu Special Equipment Management Association, http://www.jsase.com/; ② For those nationwide: China Industrial Gas Association, http://www.cn-pe.org/index.aspx. Registration has already started for the second option, so which one should I choose? What are the pros and cons? What are the differences in difficulty? Seek guidance from experts! ! !
The Gas Industry Association, well, it’s ** after all, though none of them are particularly useful.
It depends on the type of container you design; for high-pressure and spherical tank types, it is recommended to take the national exam, otherwise you can take the exam in Jiangsu
This post was last edited by zjq1962 on 2021-11-16 08:23. The verification certificate is not mandatory. If it is a Grade D unit in Jiangsu, it’s fine to use the standards from Jiangsu; generally, the evaluation panel consists of members from the same province, and they will recognize those standards during the evaluation ； If it’s from another province, no matter what level of organization it is, or if one takes the exam offered by the Gas Association, the qualifications obtained in Jiangsu may not be recognized.
It’s better to take the exam offered by the Gas Association; after all, it’s well-known throughout the country
Jiangsu is of no use at all for the design certification of these three types of containers
For the three categories, it still depends on whether it is grade A or grade D.
It’s definitely a national exam; once passed, the certificate can be found on the RCAC website and is recognized nationwide.