Thread Content
1. What is the radiation chamber of a heating furnace? The radiation chamber of a heating furnace refers to the part within the furnace where the heat generated by the burner is transferred, primarily through radiation, to the oil inside the radiation coil. 2. What is the furnace roof of a heating furnace? The furnace roof refers to the flat or sloped ceiling area within the radiant chamber of a heating furnace, directly above the furnace bottom. 3. What is the convection chamber of a heating furnace? The convection chamber of a heating furnace refers to the part within the furnace where, primarily through convection, the heat generated by the burner is transferred to the oil inside the convection coil. 4. What is a furnace chimney? A chimney is a vertical device used to discharge smoke into the atmosphere. 5. What is a windbreaker? A wind deflector is a component installed on steel chimneys to reduce wind-induced vibration. 6. What is a wall panel? Wall panels refer to metal sheets used to enclose heating furnaces. 7. What is flue gas? Flue gas refers to the combustion products, including excess air. 8. What is a tail flue? The tail flue refers to the enclosed component that collects the flue gas at the rear of the convection chamber and sends it to the chimney or external flue. 9. What is a smoke duct? Flue ducts refer to the passages through which air and flue gas flow. 10. What is a burner? A burner is a component that introduces fuel and air into the furnace under turbulent conditions at the desired mixing ratio and flow rate, thereby ensuring and maintaining the conditions necessary for ignition and combustion.