Thread Content
I. What is dew point? It can be simply understood as the air temperature at which, under a certain atmospheric pressure, the water vapor content in the air reaches saturation and condenses into liquid water. At this temperature, the condensed water that floats in the air is called fog, while when it adheres to solid surfaces, it is called dew. In most process industries, moisture is a pollutant that has adverse effects; it can lead to poor product quality, pipe corrosion, freezing at low temperatures, premature wear and equipment failure, as well as reactions with other chemicals and gases. In the industrial sector, dew point temperature is a critical parameter. In specific processes such as drying, refrigeration, and gas treatment, inadequate control of the dew point temperature can lead to corrosion and damage of components, thereby causing mechanical failures, contamination, and freezing. Real-time monitoring and control of dew point temperature are key to controlling air humidity, ensuring product quality, and improving production efficiency. II. Illustrative examples: 1. A high sulfur content in the fuel results in a high dew point as well. Sulfur dioxide is produced when fuel burns, and it is further oxidized to sulfur trioxide. Sulfur trioxide reacts with water vapor in the flue gases to form sulfuric acid vapor. If the flue gas temperature is too low, dilute sulfuric acid will form and adhere to the pipelines, causing corrosion. This is called dew point corrosion. 2. Some chemical reactions are sensitive to water; for example, in the polymerization of propylene, the catalyst reacts when exposed to water, and this can even lead to explosions, resulting in the failure of the reaction or safety incidents. This is why it is necessary to purge the system with nitrogen before starting the reaction, until the dew point analysis shows satisfactory results, such as a dew point of -20°C. 3. The development of the precision industry relies on proper control of dew point levels. Take the welding of engine blades as an example: if the humidity of the argon gas used in TIG welding is too high, blackening will occur, the blades will become brittle and their heat resistance will decline, leading to accidents once they are put into use. Some clean rooms and drying areas in lithium battery production have extremely high requirements for dew point detection. Other common applications include medical gases, dry environments for lithium battery production, and high-voltage gas-insulated equipment used in the power industry. III. Monitoring the dew point in process gases offers the following benefits: 1. Process safety and protection equipment: Excessive moisture in pipelines can lead to corrosion, reduce the integrity of the equipment, and may cause leaks or even explosions. In cold conditions, ice may form and block the pipes. Controlling humidity can reduce the need for unplanned maintenance and protect employees. 2. Quality: Moisture has an adverse effect on many end products. In metallurgy, the moisture level inside the furnace needs to be carefully controlled to prevent the product from becoming weak, while in pharmaceutical production, the powder must remain dry to avoid caking. Refineries need low moisture levels to avoid unnecessary chemical reactions. In processes with high requirements for gas purity, moisture as a contaminant must be monitored promptly. 3. Energy savings: The highest cost in many processes is the heat required by the dryer. Monitoring the dryer’s output ensures that the cycle can be stopped as soon as the drying process is complete. 4. Compliance with standards: Many global industry organizations adhere to international quality standards, which typically include requirements regarding moisture or dew point levels. For example, the EASEE natural gas standard for natural gas quality. IV. Stability and accuracy are the biggest challenges in dew point measurement. The importance of dew point temperature dictates that precise measurements must be taken to avoid losses. In many industries such as petrochemicals, power generation, electronics, aerospace, metallurgy, and textiles, the demand for dew point measurement is increasing steadily. In the field of dew point measurement, dew point technology has been highly refined; currently, there are numerous measurement principles as well as various dew point measuring instruments available both domestically and internationally. A dew point meter is an instrument that can directly measure the dew point temperature in air or gases; it belongs to the category of temperature and humidity sensors, and holds a significant role in modern humidity measurement techniques. It is commonly used in environments such as workshops, factories, warehouses, and laboratories where it is necessary to monitor temperature and humidity. It helps production and quality control departments accurately determine the dew point of compressed gases, enabling consistent and precise control over product quality and thereby enhancing the value of the products.