Online heat exchanger selection
Thread Content
Hello everyone. I’m posting this to offer selection services for plate, plate-and-shell, and semi-welded plate heat exchangers. The data required includes inlet and outlet temperatures, the type of fluid and its flow rate (or heat transfer volume), operating pressure, and environmental conditions. I’m available for consultations from 8:00 to 17:00. I will select the most suitable heat exchanger model free of charge within about an hour, based on the information provided. There are no fees or advertisements involved; it’s purely for informational purposes.
Yes, no fees or ads – it’s purely for communicating with everyone
I support the original poster’s activities; if you need anything, be sure to come and visit! ! !
Hello. Plate heat exchanger for central heating: the temperature on the hot side is 68–50°C, while the temperature on the cold side should be 42–36°C. The heat load is 1250 kW. Please help select the appropriate model. Thank you~
It is recommended to use S42 in 48 pieces, with a heat exchange area of 21.2㎡
It is recommended to use S42 in 48 pieces, with a heat exchange area of 21.2㎡