Heat exchange area
Thread Content
Heating steam pressure: 1.5 MPa, temperature 200℃； The inlet temperature of the medium is 85°C, the flow rate is 7.5 t/h, and the outlet temperature is 190°C. What size heat exchange area is required for the heat exchanger?
Recommended book: \"Principles of Chemical Engineering.\" This question relates to basic knowledge.
The questions are not detailed enough – the specific heat of the medium and the heat transfer coefficient of the type of heat exchanger to be used!
The medium components are required to determine the heat exchange area; when media with different components are used in the same heat exchanger, the conditions at the medium outlet vary
The given conditions are insufficient; the composition of the medium and the pressure need to be specified
It needs to be specified what the medium is At such high temperatures, a fully welded plate heat exchanger can be considered. For details, you can contact me on QQ at 1035366037.
The parameters provided are insufficient; a rough estimate based on water usage: around 10-20 square meters for a plate heat exchanger； The shell area is about 50-80 square meters. Ha, I’m sorry, but that’s not allowed.