Protection against scaling and oxygen corrosion in heat exchange equipment of circulating water systems
Thread Content
This post was last edited by chxyyd on 2019-3-12 at 19:20 :):) Dear everyone, petrochemical processing processes rely on heat exchange equipment, such as various types of heat exchangers, reactors, kettles, boilers, and so on. During its use, phenomena such as scaling and corrosion occur, which affect the stability of the process, damage the equipment, pose safety risks, and increase the frequency and difficulty of inspection and maintenance. The use of chemical agents, on the other hand, raises environmental and cost issues. Now, I would like to recommend to you an online device that requires no maintenance costs. It eliminates the problems of scaling and corrosion in heat exchange equipment without the need for chemical agents, and its service life is 5 years or more. Feel free to get in touch if needed; thank you so much:D:D
{:1_90:}:handshake:call:{:2_36:}Welcome to discuss and exchange ideas
On-site installation diagram; the red devices shown in the drawing are what need to be installed. Isn’t that simple? :P
What’s the principle? I’d like to learn about it!
Can it automatically remove the scale buildup inside the heat exchanger? Our plate heat exchangers are suffering from severe scaling, mainly due to the high hardness of the water. Heat is exchanged between saturated steam and water, and the outlet temperature is around 80 degrees; this scaling problem is really troublesome. I’d like to explain it in detail
Adding a scale inhibitor will do; feel free to contact me if you need it. I also handle online cleaning of plate heat exchangers
Is the circulating water system available?
This post was last edited by chxyyd on 2019-2-20 23:42. Of course. Used in circulating water stations, it provides anti-scaling and anti-oxidation/corrosion protection for all the equipment in the cooling water system.