Thread Content
Features of traditional closed-loop cooling towers: The only feature of traditional closed-loop cooling towers is their ability to maintain the cleanliness of the medium being cooled. They have high energy consumption, result in significant water waste, and come with high maintenance costs. The Ecomic detachable plate-type closed tower precisely addresses the shortcomings of traditional closed cooling towers. Its feature is that it employs a plate-based heat exchange structure; the heat transfer coefficient of this type of closed cooling tower is more than 5 times that of traditional tubular closed cooling towers. Thanks to its excellent heat exchange efficiency, this equipment can achieve an effect equivalent to that of water-cooled or air-cooled systems. The special corrugated structure ensures that there are sufficient turbulence points on both the open side and the closed side, without affecting the pressure drop. The material can be changed as desired; for different media, it is sufficient to purchase the appropriate heat exchange plates, without having to consider processing properties or manufacturing processes. I. Save electrical energy. The corrugated plate itself possesses extremely high heat exchange performance, and it can also enable evaporative cooling of the spray water. When the ambient temperature is high in summer, the spray pump is activated; the evaporation of the spray water absorbs heat, thereby **improving the efficiency of the cooler and reducing the power consumption of the fan. For plate air coolers with the same heat exchange capacity that use spray water for evaporative cooling, their energy consumption is less than 50% of that of conventional dry air coolers. II. Low water consumption. Compared to traditional water-cooled and wet-cooled systems, fully dry air cooling can be used in spring, autumn, and winter, with no water consumption; as a result, the annual water usage is only 25% that of traditional wet-cooling systems. III. Easy to maintain. The Aikemike detachable plate-type air cooler uses a corrugated plate design, which facilitates disassembly and assembly, simplifies maintenance, and makes it easier to remove scale and dust from the surface area. It is maintained every one to two years, restoring the equipment’s performance to its factory settings. IV. Utilization of natural wind energy. The Ecolmic plate-type air cooler enables the utilization of natural wind energy. In areas with strong winds throughout the year, the Ecolmic wind wall makes use of natural wind directly, eliminating the need for fans and thus avoiding any power consumption. V. It occupies little space. The Aikemic plate-type air cooler is arranged in a direct three-dimensional configuration, which allows for a 60-90% reduction in space requirements; this can result in significant savings in land costs for users with limited land availability.