SO flange 10 inches x 600#, Sch.80, RF, ANSI B 16.5
Thread Content
Are there any drawings available for ANSI flanges, standard ANSI B 16.5 SO, 10 inches x 600#, Sch.80, RF?
Go and check the ASME B16.5 standard!
There is the HG/T20615-2009 standard, which specifies SO 10 inches x 600#, Sch.80, RF.
I would like to ask whether SCH80 is relevant; the customer also provided specifications for a part of the same size but with a thickness of SCH160. Are these details related to the flange?
Does anyone who’s been by know? ?
That is the wall thickness of the interface, as well as the diameter of the flange’s inner hole; all other information remains the same.
For SO, you don’t need to worry about SCH80 and SHC160
Ignore this for SO; it’s SCH80 and SHC160
It is recommended to download the PIPEDATE software to check it.
In HG20592, SO refers to a flat welding flange with a neck; in this standard, there is no specification for SCH wall thickness； But yours is according to the American standard ANSI B16.5; it should indicate the wall thickness of the reduced neck. I’ve forgotten the exact value – I’ll send you the standard tomorrow