On the topic of \"Compilation of Chinese Machinery Industry Standards: Welding and Cutting Volume (Second Edition)\\"
Thread Content
On the topic of \"Compilation of Standards for China’s Machinery Industry – Welding and Cutting Volume (Second Edition)\": Title: Compilation of Standards for China’s Machinery Industry – Welding and Cutting Volume (Second Edition); Authors: Third Editing Department of China Standard Press, National Welding Standardization Technical Committee; Publisher: China Standard Press; Publication date: December 2006. Overview: This volume was compiled by the Third Editing Department of China Standard Press in collaboration with the National Welding Standardization Technical Committee; it contains 136 current standards that were approved and issued up to the end of 1998. Among them, **89 are standard ones, and 47 are industry standards for machinery. Published in two volumes, upper and lower. The contents of the first volume include: basic fundamentals, welding materials and their inspection ； The contents of the second volume include: testing and inspection of welded joints and welds, welding process methods and auxiliary tools, and cutting. I. Since the publication of this Standard Compilation, 32 standards have been revised and updated: GB/T 324-2008 Representation of Weld Symbols (replacing GB/T 324-1988); GB/T 983-2012 Stainless Steel Electrodes (replacing GB/T 983-1995); GB/T 3609.1-2008 Occupational Eye and Face Protection – Welding Protection, Part 1: Welding Protective Equipment (replacing GB/T 3609.1-1994); GB/T 3965-2012 Methods for Determining Diffused Hydrogen in Deposited Metal (replacing GB/T 3965-1995); GB/T 5107-2008 Gas Welding Equipment – Fittings for Hose Connections Used in Welding, Cutting, and Related Processes (replacing GB/T 5107-1985); GB/T 5117-2012 Electrodes for Non-alloy Steels and Fine-grained Steels (replacing GB/T 5117-1995); GB/T 5118-2012 Electrodes for Heat-resistant Steels (replacing GB/T 5118-1995); GB/T 6418-2008 Copper-based Brazing Alloys (replacing GB/T 6418-1993); GB/T 8110-2008 Carbon Steel and Low-alloy Steel Wires for Gas Shielded Arc Welding (replacing GB/T 8110-1995); GB/T 9460-2008 Wires for Welding Copper and Copper Alloys (replacing GB/T 9460-1988); GB/T 10046-2008 Silver Brazing Alloys (replacing GB/T 10046-2000); GB/T 10859-2008 Nickel-based Brazing Alloys (replacing GB/T 10859-1989); GB/T 11345-2013 Non-destructive Testing of Welds – Ultrasonic Testing: Techniques, Inspection Levels, and Evaluation (replacing GB/T 11345-1989); GB/T 11363-2008 Test Methods for the Strength of Brazed Joints (replacing GB/T 11363-1989); GB/T 11364-2008 Test Methods for the Wetting Property of Brazing Alloys (replacing GB/T 11364-1989); GB/T 12467.1-2009 Quality Requirements for Fusion Welding of Metal Materials – Part 1: Criteria for Selecting Appropriate Quality Levels (replacing GB/T 12467.1-1998); GB/T 12467.2-2009 Quality Requirements for Fusion Welding of Metal Materials – Part 2: Comprehensive Quality Requirements (replacing GB/T 12467.2-1998); GB/T 12467.3-2009 Quality Requirements for Fusion Welding of Metal Materials – Part 3: General Quality Requirements (replacing GB/T 12467.3-1998); GB/T 12467.4-2009 Quality Requirements for Fusion Welding of Metal Materials – Part 4: Basic Quality Requirements (replacing GB/T 12467.4-1998); GB/T 12605-2008 Non-destructive Testing – Radiographic Testing of Circumferential Butt Joints in Fusion Welded Metal Pipes (replacing GB/T 12605-1990); GB/T 13815-2008 Aluminum-based Brazing Alloys (replacing GB/T 13815-1992); GB/T 14693-2008 Non-destructive Testing – Symbol Representation (replacing GB/T 14693-1993); GB/T 15620-2008 Wires for Welding Nickel and Nickel Alloys (replacing GB/T 15620-1995); GB/T 15829-2008 Classification and Performance Requirements for Soft Fluxes (replacing GB/T 15829.1–.4-1995); GB/T 15830-2008 Non-destructive Testing – Ultrasonic Testing of Circumferential Weld Butt Joints in Steel Pipes (replacing GB/T 15830-1995); GB/T 17493-2008 Flux-cored Wires for Low-alloy Steels (replacing GB/T 17493-1998); JB/T 5102-2011 Coordinate Cutting Machines (replacing JB/T 5102-1999); JB/T 7437-2015 Dry Type Tempering Arrestors (replacing JB/T 7437-1994); JB/T 7902-2015 Non-destructive Testing – General Specifications for Linear Image Quality Inspectors (replacing JB/T 7902-2006); JB/T 7950-2014 Flame Nozzles (replacing JB/T 7950-1999); JB/T 8428-2015 Non-destructive Testing – General Specifications for Ultrasonic Test Blocks (replacing JB/T 8428-2006); JB/T 8795-2013 Water Electrolysis Hydrogen and Oxygen Generators (replacing JB/T 8795-1998).II. The author has compiled the table of contents of the “Compilation of Standards of China’s Machinery Industry – Welding and Cutting Volume (Second Edition)” below for the benefit of all readers
This post was last edited by nj1952 on 2017-6-25 at 16:51. Table of Contents for “Compilation of Standards for China’s Machinery Industry – Welding and Cutting Volume (Second Edition)”
I. General Foundations
GB/T 324-2008: Representation of weld symbols
GB/T 985.1-2008: Recommended grooves for gas welding, shielded metal arc welding, gas-tungsten arc welding, and high-energy beam welding
GB/T 985.2-2008: Recommended grooves for submerged arc welding
GB/T 985.3-2008: Recommended grooves for gas-tungsten arc welding of aluminum and aluminum alloys
GB/T 985.4-2008: Recommended grooves for composite steels
GB/T 986-1988: Basic forms and dimensions of grooves for submerged arc welding welds
GB/T 3375-1994: Welding terminology
GB/T 5185-2005: Method for coding welding and related processes
GB/T 6208-1995: Method for representing tungsten electrode types
GB/T 6416-1986: Technical factors affecting the quality of metal fusion welded joints
GB/T 6417.1-2005: Classification and description of defects in metal fusion welded joints
GB/T 6417.2-2005: Classification and description of defects in metal pressure welded joints
GB/T 6419-1986: Examination rules for underwater welders
GB/T 12467.1-2009: Quality requirements for metal fusion welding – Part 1: Criteria for selecting appropriate quality levels
GB/T 12467.2-2009: Quality requirements for metal fusion welding – Part 2: Comprehensive quality requirements
GB/T 12467.3-2009: Quality requirements for metal fusion welding – Part 3: General quality requirements
GB/T 12467.4-2009: Quality requirements for metal fusion welding – Part 4: Basic quality requirements
GB/T 12467.5-2009: Quality requirements for metal fusion welding – Part 5: Standard documents to be referenced for meeting quality requirements
GB/T 12469-1990: Welding quality assurance – Requirements and defect classification for steel fusion welded joints
GB/T 14693-2008: Non-destructive testing – Symbol representation
GB/T 15169-2003: Skill assessment for steel fusion welding workers
GB/T 16672-1996: Welds – Working positions – Definitions of inclination and rotation angles
GB/T 19869.1-2005: Welding procedure qualification tests for steel, nickel, and nickel alloys
GB/T 19869.2-2012: Welding procedure qualification tests for aluminum and aluminum alloys
JB/T 3223-1996: Regulations for quality management of welding materials
JB/T 6043-1992: Classification of defects in metal resistance welded joints
JB/T 7949-1999 (GB 10854-1989): Dimensions of welds in steel structures
II. Fusion Welding Materials
GB/T 983-2012: Stainless steel electrodes
GB/T 984-2001: Cladding welding electrodes
GB/T 3669-2001: Electrodes for aluminum and aluminum alloys
GB/T 3670-1995: Electrodes for copper and copper alloys
GB/T 5117-2012: Electrodes for non-alloy steels and fine-grained steels
GB/T 5118-2012: Electrodes for heat-resistant steels
GB/T 5293-1999: Carbon steel wires and fluxes for submerged arc welding
GB/T 8110-2008: Carbon steel and low-alloy steel wires for gas-tungsten arc welding
GB/T 9460-2008: Wires for copper and copper alloys
GB/T 10044-2006: Electrodes and wires for cast iron
GB/T 10045-2001: Carbon steel cored wires
GB/T 10858-2008: Wires for aluminum and aluminum alloys
GB/T 12470-2003: Low-alloy steel wires and fluxes for submerged arc welding
GB/T 13814-2008: Electrodes for nickel and nickel alloys
GB/T 15620-2008: Wires for nickel and nickel alloys
GB/T 17493-2008: Low-alloy steel cored wires
GB/T 17853-1999: Stainless steel cored wires
GB/T 17854-1999: Stainless steel wires and fluxes for submerged arc welding
JB/T 3168.1-1999: Technical specifications for spray welding alloy powders
JB/T 6964-1993: Ultra-fine carbon steel electrodes
I. General Foundations
GB/T 324-2008: Representation of weld symbols
GB/T 985.1-2008: Recommended grooves for gas welding, shielded metal arc welding, gas-tungsten arc welding, and high-energy beam welding
GB/T 985.2-2008: Recommended grooves for submerged arc welding
GB/T 985.3-2008: Recommended grooves for gas-tungsten arc welding of aluminum and aluminum alloys
GB/T 985.4-2008: Recommended grooves for composite steels
GB/T 986-1988: Basic forms and dimensions of grooves for submerged arc welding welds
GB/T 3375-1994: Welding terminology
GB/T 5185-2005: Method for coding welding and related processes
GB/T 6208-1995: Method for representing tungsten electrode types
GB/T 6416-1986: Technical factors affecting the quality of metal fusion welded joints
GB/T 6417.1-2005: Classification and description of defects in metal fusion welded joints
GB/T 6417.2-2005: Classification and description of defects in metal pressure welded joints
GB/T 6419-1986: Examination rules for underwater welders
GB/T 12467.1-2009: Quality requirements for metal fusion welding – Part 1: Criteria for selecting appropriate quality levels
GB/T 12467.2-2009: Quality requirements for metal fusion welding – Part 2: Comprehensive quality requirements
GB/T 12467.3-2009: Quality requirements for metal fusion welding – Part 3: General quality requirements
GB/T 12467.4-2009: Quality requirements for metal fusion welding – Part 4: Basic quality requirements
GB/T 12467.5-2009: Quality requirements for metal fusion welding – Part 5: Standard documents to be referenced for meeting quality requirements
GB/T 12469-1990: Welding quality assurance – Requirements and defect classification for steel fusion welded joints
GB/T 14693-2008: Non-destructive testing – Symbol representation
GB/T 15169-2003: Skill assessment for steel fusion welding workers
GB/T 16672-1996: Welds – Working positions – Definitions of inclination and rotation angles
GB/T 19869.1-2005: Welding procedure qualification tests for steel, nickel, and nickel alloys
GB/T 19869.2-2012: Welding procedure qualification tests for aluminum and aluminum alloys
JB/T 3223-1996: Regulations for quality management of welding materials
JB/T 6043-1992: Classification of defects in metal resistance welded joints
JB/T 7949-1999 (GB 10854-1989): Dimensions of welds in steel structures
II. Fusion Welding Materials
GB/T 983-2012: Stainless steel electrodes
GB/T 984-2001: Cladding welding electrodes
GB/T 3669-2001: Electrodes for aluminum and aluminum alloys
GB/T 3670-1995: Electrodes for copper and copper alloys
GB/T 5117-2012: Electrodes for non-alloy steels and fine-grained steels
GB/T 5118-2012: Electrodes for heat-resistant steels
GB/T 5293-1999: Carbon steel wires and fluxes for submerged arc welding
GB/T 8110-2008: Carbon steel and low-alloy steel wires for gas-tungsten arc welding
GB/T 9460-2008: Wires for copper and copper alloys
GB/T 10044-2006: Electrodes and wires for cast iron
GB/T 10045-2001: Carbon steel cored wires
GB/T 10858-2008: Wires for aluminum and aluminum alloys
GB/T 12470-2003: Low-alloy steel wires and fluxes for submerged arc welding
GB/T 13814-2008: Electrodes for nickel and nickel alloys
GB/T 15620-2008: Wires for nickel and nickel alloys
GB/T 17493-2008: Low-alloy steel cored wires
GB/T 17853-1999: Stainless steel cored wires
GB/T 17854-1999: Stainless steel wires and fluxes for submerged arc welding
JB/T 3168.1-1999: Technical specifications for spray welding alloy powders
JB/T 6964-1993: Ultra-fine carbon steel electrodes
This post was last edited by nj1952 on June 25, 2017, at 16:52.
III. Brazing materials
GB/T 3131-2001 Tin-lead brazing filler metals
GB/T 6418-2008 Copper-based brazing filler metals
GB/T 10046-2008 Silver brazing filler metals
GB/T 10859-2008 Nickel-based brazing filler metals
GB/T 13679-1992 Manganese-based brazing filler metals
GB/T 13815-2008 Aluminum-based brazing filler metals
GB/T 15829-2008 Classification and performance requirements for soft soldering fluxes
JB/T 6045-1992 Fluxes for brazing
IV. Tests and inspections
GB/T 2649-1989 Sampling methods for mechanical property tests of welded joints
GB/T 2650-2008 Impact test methods for welded joints
GB/T 2651-2008 Tensile test methods for welded joints
GB/T 2652-2008 Tensile test methods for welds and deposited metals
GB/T 2653-2008 Bend test for welded joints
GB/T 2654-2008 Hardness test methods for welded joints
GB/T 2655-1989 Test methods for strain aging sensitivity of welded joints
GB/T 2656-1981 Fatigue test methods for weld metals and welded joints
GB/T 3323-2005 Radiographic inspection of welded joints in metallic fusion welding
GB/T 3731-1983 Determination of efficiency of coated electrodes, metal recovery rate, and deposition coefficient
GB/T 3965-2012 Method for determining diffused hydrogen in deposited metals
GB/T 4675.1-1984 Test method for welding cracks in inclined Y-groove joints under weldability tests
GB/T 4675.2-1984 Test method for welding cracks in lap joints (CTS) under weldability tests
GB/T 4675.3-1984 Test method for welding cracks in T-joints under weldability tests
GB/T 4675.4-1984 Test method for welding cracks in butt joints with clamping plates (FISCO) under weldability tests
GB/T 4675.5-1984 Test method for determining maximum hardness in the heat-affected zone under weldability tests
GB/T 7032-1986 Bend test method for T-type corner welded joints
GB/T 8619-1988 Test method for strength of brazed joints
GB/T 9446-1988 Test method for cold cracking in welding using insertion pins
GB/T 9447-1988 Test method for fatigue crack growth rate in welded joints
GB/T 11345-2013 Non-destructive testing of welds – Ultrasonic testing: Techniques, testing levels, and evaluation
GB/T 11363-2008 Test method for strength of brazed joints
GB/T 11364-2008 Test method for wettability of brazing filler metals
GB/T 12605-2008 Non-destructive testing – Radiographic inspection method for circumferential butt joints in metallic pipeline fusion welding
GB/T 13450-1992 Tensile test method for wide plates with butt-welded joints
GB/T 13816-1992 Pulsating tensile fatigue test method for welded joints
GB/T 13817-1992 Test method for welding cracks in rigidly restrained butt joints
GB/T 15111-1994 Shear-tensile fatigue test method for spot-welded joints
GB/T 15747-1995 Tensile test method for fillet-welded joints on the front surface
GB/T 15830-2008 Non-destructive testing – Ultrasonic inspection method for circumferential butt joints in steel pipelines
JB/T 3168.2-1999 Determination of hardness and particle size of spray-welding alloy powders
JB/T 3168.3-1999 Chemical analysis method for spray-welding alloy powders
JB/T 4291-1999 Test method for crack opening displacement (COD) in welded joints
JB/T 5104-1991 Evaluation of brittle fracture in welded joints
JB/T 6044-1992 Side-groove test method for fatigue crack growth rate in welded joints
JB/T 6061-2007 Non-destructive testing – Magnetic particle inspection of welds
JB/T 6062-2007 Non-destructive testing – Penetrant inspection of welds
JB/T 6966-1993 Evaluation method for appearance quality of brazed joints
JB/T 7520.1-1994 Chemical analysis method for phosphor copper brazing filler metals – Determination of copper content by EDTA volumetric method
JB/T 7520.2-1994 Chemical analysis method for phosphor copper brazing filler metals – Determination of silver content by silver chloride gravimetric method
JB/T 7520.3-1994 Chemical analysis method for phosphor copper brazing filler metals – Determination of phosphorus content by vanadomolybdate photometric method
JB/T 7520.4-1994 Chemical analysis method for phosphor copper brazing filler metals – Determination of antimony content by potassium iodide photometric method
JB/T 7520.5-1994 Chemical analysis method for phosphor copper brazing filler metals – Determination of tin content by hypophosphite reduction volumetric method
JB/T 7520.6-1994 Chemical analysis method for phosphor copper brazing filler metals – Determination of nickel content by dimedone oxime photometric method
JB/T 7716-1995 Four-point bend fatigue test method for welded joints
JB/T 7717-1995 ECO test method for welded joints
JB/T 7853-1995 Measurement of ferrite content in weld metals of chromium-nickel austenitic stainless steels
JB/T 7902-2015 Non-destructive testing – General specifications for linear image quality indicators
JB/T 7948.1-1999 Chemical analysis method for fused fluxes – Determination of silica content by gravimetric method
JB/T 7948.2-1999 Chemical analysis method for fused fluxes – Determination of manganese oxide content by potentiometric titration
JB/T 7948.3-1999 Chemical analysis method for fused fluxes – Determination of manganese oxide content by permanganate photometric method
JB/T 7948.4-1999 Chemical analysis method for fused fluxes – Determination of alumina content by EDTA volumetric method
JB/T 7948.5-1999 Chemical analysis method for fused fluxes – Determination of iron oxide content by sulfosalicylic acid photometric method
JB/T 7948.6-1999 Chemical analysis method for fused fluxes – Determination of calcium fluoride content by pyrolysis method
JB/T 7948.7-1999 Chemical analysis method for fused fluxes – Determination of calcium fluoride content by lead fluorochloride-EDTA volumetric method
JB/T 7948.8-1999 Chemical analysis method for fused fluxes – Determination of phosphorus content by molybdenum blue photometric method
JB/T 7948.9-1999 Chemical analysis method for fused fluxes – Determination of sodium oxide and potassium oxide content by flame photometry
JB/T 7948.10-1999 Chemical analysis method for fused fluxes – Determination of carbon content by combustion-coulometric method
JB/T 7948.11-1999 Chemical analysis method for fused fluxes – Determination of sulfur content by combustion-iodometric method
JB/T 7948.12-1999 Chemical analysis method for fused fluxes – Determination of calcium oxide and magnesium oxide content by EDTA volumetric method
JB/T 8423-1996 Evaluation method for welding process performance of coated electrodes
JB/T 8428-2015 Non-destructive testing – General specifications for ultrasonic test blocks
JB/T 8931-1999 Ultrasonic flaw detection method for surfacing layers
III. Brazing materials
GB/T 3131-2001 Tin-lead brazing filler metals
GB/T 6418-2008 Copper-based brazing filler metals
GB/T 10046-2008 Silver brazing filler metals
GB/T 10859-2008 Nickel-based brazing filler metals
GB/T 13679-1992 Manganese-based brazing filler metals
GB/T 13815-2008 Aluminum-based brazing filler metals
GB/T 15829-2008 Classification and performance requirements for soft soldering fluxes
JB/T 6045-1992 Fluxes for brazing
IV. Tests and inspections
GB/T 2649-1989 Sampling methods for mechanical property tests of welded joints
GB/T 2650-2008 Impact test methods for welded joints
GB/T 2651-2008 Tensile test methods for welded joints
GB/T 2652-2008 Tensile test methods for welds and deposited metals
GB/T 2653-2008 Bend test for welded joints
GB/T 2654-2008 Hardness test methods for welded joints
GB/T 2655-1989 Test methods for strain aging sensitivity of welded joints
GB/T 2656-1981 Fatigue test methods for weld metals and welded joints
GB/T 3323-2005 Radiographic inspection of welded joints in metallic fusion welding
GB/T 3731-1983 Determination of efficiency of coated electrodes, metal recovery rate, and deposition coefficient
GB/T 3965-2012 Method for determining diffused hydrogen in deposited metals
GB/T 4675.1-1984 Test method for welding cracks in inclined Y-groove joints under weldability tests
GB/T 4675.2-1984 Test method for welding cracks in lap joints (CTS) under weldability tests
GB/T 4675.3-1984 Test method for welding cracks in T-joints under weldability tests
GB/T 4675.4-1984 Test method for welding cracks in butt joints with clamping plates (FISCO) under weldability tests
GB/T 4675.5-1984 Test method for determining maximum hardness in the heat-affected zone under weldability tests
GB/T 7032-1986 Bend test method for T-type corner welded joints
GB/T 8619-1988 Test method for strength of brazed joints
GB/T 9446-1988 Test method for cold cracking in welding using insertion pins
GB/T 9447-1988 Test method for fatigue crack growth rate in welded joints
GB/T 11345-2013 Non-destructive testing of welds – Ultrasonic testing: Techniques, testing levels, and evaluation
GB/T 11363-2008 Test method for strength of brazed joints
GB/T 11364-2008 Test method for wettability of brazing filler metals
GB/T 12605-2008 Non-destructive testing – Radiographic inspection method for circumferential butt joints in metallic pipeline fusion welding
GB/T 13450-1992 Tensile test method for wide plates with butt-welded joints
GB/T 13816-1992 Pulsating tensile fatigue test method for welded joints
GB/T 13817-1992 Test method for welding cracks in rigidly restrained butt joints
GB/T 15111-1994 Shear-tensile fatigue test method for spot-welded joints
GB/T 15747-1995 Tensile test method for fillet-welded joints on the front surface
GB/T 15830-2008 Non-destructive testing – Ultrasonic inspection method for circumferential butt joints in steel pipelines
JB/T 3168.2-1999 Determination of hardness and particle size of spray-welding alloy powders
JB/T 3168.3-1999 Chemical analysis method for spray-welding alloy powders
JB/T 4291-1999 Test method for crack opening displacement (COD) in welded joints
JB/T 5104-1991 Evaluation of brittle fracture in welded joints
JB/T 6044-1992 Side-groove test method for fatigue crack growth rate in welded joints
JB/T 6061-2007 Non-destructive testing – Magnetic particle inspection of welds
JB/T 6062-2007 Non-destructive testing – Penetrant inspection of welds
JB/T 6966-1993 Evaluation method for appearance quality of brazed joints
JB/T 7520.1-1994 Chemical analysis method for phosphor copper brazing filler metals – Determination of copper content by EDTA volumetric method
JB/T 7520.2-1994 Chemical analysis method for phosphor copper brazing filler metals – Determination of silver content by silver chloride gravimetric method
JB/T 7520.3-1994 Chemical analysis method for phosphor copper brazing filler metals – Determination of phosphorus content by vanadomolybdate photometric method
JB/T 7520.4-1994 Chemical analysis method for phosphor copper brazing filler metals – Determination of antimony content by potassium iodide photometric method
JB/T 7520.5-1994 Chemical analysis method for phosphor copper brazing filler metals – Determination of tin content by hypophosphite reduction volumetric method
JB/T 7520.6-1994 Chemical analysis method for phosphor copper brazing filler metals – Determination of nickel content by dimedone oxime photometric method
JB/T 7716-1995 Four-point bend fatigue test method for welded joints
JB/T 7717-1995 ECO test method for welded joints
JB/T 7853-1995 Measurement of ferrite content in weld metals of chromium-nickel austenitic stainless steels
JB/T 7902-2015 Non-destructive testing – General specifications for linear image quality indicators
JB/T 7948.1-1999 Chemical analysis method for fused fluxes – Determination of silica content by gravimetric method
JB/T 7948.2-1999 Chemical analysis method for fused fluxes – Determination of manganese oxide content by potentiometric titration
JB/T 7948.3-1999 Chemical analysis method for fused fluxes – Determination of manganese oxide content by permanganate photometric method
JB/T 7948.4-1999 Chemical analysis method for fused fluxes – Determination of alumina content by EDTA volumetric method
JB/T 7948.5-1999 Chemical analysis method for fused fluxes – Determination of iron oxide content by sulfosalicylic acid photometric method
JB/T 7948.6-1999 Chemical analysis method for fused fluxes – Determination of calcium fluoride content by pyrolysis method
JB/T 7948.7-1999 Chemical analysis method for fused fluxes – Determination of calcium fluoride content by lead fluorochloride-EDTA volumetric method
JB/T 7948.8-1999 Chemical analysis method for fused fluxes – Determination of phosphorus content by molybdenum blue photometric method
JB/T 7948.9-1999 Chemical analysis method for fused fluxes – Determination of sodium oxide and potassium oxide content by flame photometry
JB/T 7948.10-1999 Chemical analysis method for fused fluxes – Determination of carbon content by combustion-coulometric method
JB/T 7948.11-1999 Chemical analysis method for fused fluxes – Determination of sulfur content by combustion-iodometric method
JB/T 7948.12-1999 Chemical analysis method for fused fluxes – Determination of calcium oxide and magnesium oxide content by EDTA volumetric method
JB/T 8423-1996 Evaluation method for welding process performance of coated electrodes
JB/T 8428-2015 Non-destructive testing – General specifications for ultrasonic test blocks
JB/T 8931-1999 Ultrasonic flaw detection method for surfacing layers
The last edit to this post was made by nj1952 on 2017-6-25 at 16:52.
V. Process Methods
JB/T 4251-1999 Friction Welding – General Technical Requirements
JB/T 6046-1992 Welded Components of Carbon Steel and Low-Alloy Steel – Post-Weld Heat Treatment
JB/T 6965-1993 Welding Manipulators
JB/T 6967-1993 Electroslag Welding – General Technical Requirements
JB/T 8833-2001 Welding Positioners
JB/T 9185-1999 Tungsten Inert Gas Shielded Welding Process Methods
JB/T 9186-1999 Carbon Dioxide Gas Shielded Welding Procedure Specifications
JB/T 9187-1999 Welding Roller Frames
VI. Welding Safety
GB/T 3609.1-2008 Occupational Eye and Face Protection – Welding Protection, Part 1: Welding Protective Equipment
GB/T 5748-1985 Methods for Determining Dust in Workplace Air
GB 9448-1999 Safety in Welding and Cutting
GB/T 15701-1995 Welding Protective Clothing
GB 16194-1996 Hygienic Standards for Welding Smoke and Dust in Workshop Air
VII. Thermal Cutting
GB/T 5107-2008 Gas Welding Equipment – Fittings for Welding, Cutting, and Related Process Equipment
JB/T 5101-1991 Cutters for Gas Cutting Machines
JB/T 5102-2011 Coordinate Cutting Machines
JB/T 6104-1992 Swing-Arm Profiled Gas Cutting Machines
JB/T 6968-1993 Portable Miniature Cutters
JB/T 6969-1993 Jet-Drawn Cutters
JB/T 6970-1993 Jet-Drawn Cutters for Cutting
JB/T 7436-1994 Trolley-Type Gas Cutting Machines
JB/T 7437-2015 Dry Backfire Preventers
JB/T 7438-1994 Air Plasma Arc Cutting Machines
JB/T 7947-1999 Isobaric Cutters and Welding Cutters
JB/T 7950-2014 Flame Nozzles
JB/T 8795-2013 Water Electrolysis Hydrogen-Oxygen Generators
V. Process Methods
JB/T 4251-1999 Friction Welding – General Technical Requirements
JB/T 6046-1992 Welded Components of Carbon Steel and Low-Alloy Steel – Post-Weld Heat Treatment
JB/T 6965-1993 Welding Manipulators
JB/T 6967-1993 Electroslag Welding – General Technical Requirements
JB/T 8833-2001 Welding Positioners
JB/T 9185-1999 Tungsten Inert Gas Shielded Welding Process Methods
JB/T 9186-1999 Carbon Dioxide Gas Shielded Welding Procedure Specifications
JB/T 9187-1999 Welding Roller Frames
VI. Welding Safety
GB/T 3609.1-2008 Occupational Eye and Face Protection – Welding Protection, Part 1: Welding Protective Equipment
GB/T 5748-1985 Methods for Determining Dust in Workplace Air
GB 9448-1999 Safety in Welding and Cutting
GB/T 15701-1995 Welding Protective Clothing
GB 16194-1996 Hygienic Standards for Welding Smoke and Dust in Workshop Air
VII. Thermal Cutting
GB/T 5107-2008 Gas Welding Equipment – Fittings for Welding, Cutting, and Related Process Equipment
JB/T 5101-1991 Cutters for Gas Cutting Machines
JB/T 5102-2011 Coordinate Cutting Machines
JB/T 6104-1992 Swing-Arm Profiled Gas Cutting Machines
JB/T 6968-1993 Portable Miniature Cutters
JB/T 6969-1993 Jet-Drawn Cutters
JB/T 6970-1993 Jet-Drawn Cutters for Cutting
JB/T 7436-1994 Trolley-Type Gas Cutting Machines
JB/T 7437-2015 Dry Backfire Preventers
JB/T 7438-1994 Air Plasma Arc Cutting Machines
JB/T 7947-1999 Isobaric Cutters and Welding Cutters
JB/T 7950-2014 Flame Nozzles
JB/T 8795-2013 Water Electrolysis Hydrogen-Oxygen Generators