Thread Content
Rubber factory VOCS exhaust gas treatment equipment 20,000 air volume structural features VOCs exhaust gas treatment equipment has advanced design principles, unique materials, stable performance, simple structure, safe and reliable, energy-saving and labor-saving, and no secondary pollution. The equipment occupies a small area and is light in weight. It adopts honeycomb ceramic-shaped precious metal catalyst as carrier, which has low resistance and high activity. When the organic vapor concentration reaches above 2000ppm, the catalytic combustion equipment can maintain spontaneous combustion. Low power consumption. Because the bed resistance is small, a low-pressure fan can work. It consumes less power and has low noise. The activated carbon layer that adsorbs organic waste gas is desorbed and regenerated with the waste gas after the catalytic combustion equipment. The adsorbed gas is then sent to the catalytic combustion chamber for purification. No external energy is required, the operating cost is low, and the energy saving effect is significant. VOCs exhaust gas treatment equipment is compact in purchase, occupies a small area, is easy to manage and maintain, and is safe to operate. The degree of automation is high, the system is controlled by PLC programmable controller, and the valves are pneumatic valves. The safety performance of the catalytic combustion purification device is intact: The system is equipped with sound and light signals for catalytic over-temperature alarm, fan failure, valve failure and other alarms. Catalytic combustion purification device has high purification efficiency: Purification efficiency ≥98%, catalytic combustion purification device has low energy consumption: The ignition temperature is low and the exhaust gas temperature is high and can be recycled. VOCs exhaust gas treatment equipment has thin hole walls, large capacity, large heat storage, and small space occupation. The hole wall is smooth and compacted. Catalytic combustion environmental protection equipment has a long service life and is not prone to corrosion, corrosion resistance and high temperature deformation. The catalytic combustion environmental protection equipment has high quality specifications. When installed, the discharge between the regenerators is neat and the misalignment is small. Catalytic combustion environmental protection equipment has the characteristics of low thermal expansion, large specific heat capacity, large specific surface area, small pressure drop, small thermal resistance, good thermal conductivity, and good heat resistance and stamping resistance. VOCs waste gas treatment equipment uses honeycomb activated carbon as the adsorbent, and combines the principles of adsorption purification, desorption regeneration and concentration of VOCs and catalytic combustion. That is, large air volume and low concentration organic waste gas is adsorbed through honeycomb activated carbon to achieve the purpose of purifying the air. When the activated carbon is saturated, hot air is used to desorb the activated carbon. After being regenerated, the concentrated organic matter desorbed is sent to the catalytic combustion bed for catalytic combustion. The organic matter is oxidized into harmless CO2 and H20. The hot exhaust gas after combustion heats the cold air through the heat exchanger. After heat exchange, it is cooled to the point where the gas is partially discharged, and part of it is used for desorption and regeneration of honeycomb activated carbon to achieve the purpose of waste heat utilization. The entire device consists of a pre-filter, adsorption bed, catalytic combustion bed, heat resistor, related fans, valves, etc.