Thread Content
Steel pipes are an important product in the steel industry, with a wide range of applications; there are also many types of steel pipes, such as seamless steel pipes. Seamless steel pipes are those made by drilling a whole round steel bar, with no welds on their surface; such pipes are known as seamless steel pipes. Based on the production method, seamless steel pipes can be classified into hot-rolled seamless steel pipes, cold-rolled seamless steel pipes, cold-drawn seamless steel pipes, extruded seamless steel pipes, jacking pipes, etc. Based on their cross-sectional shape, seamless steel pipes are divided into circular and shaped types. Shaped pipes come in various complex shapes such as square, oval, triangular, hexagonal, melon-seed shaped, star-shaped, and winged pipes. The diameter threshold is 4mm. Depending on their use, there are thick-walled seamless steel pipes and thin-walled seamless steel pipes. Seamless steel pipes are primarily used as drilling pipes for oil and gas exploration, cracking pipes in the petrochemical industry, boiler tubes, bearing tubes, as well as in automobiles and tractors. This equipment can continuously roll seamless steel products, Pierrelle-rolled seamless steel products, straight-seam welded pipes, and spiral-welded pipes. It can be installed on production lines for on-line measurement, or on inspection lines to measure the outer diameter of finished pipes. The device is equipped with two sets of dual-head units whose measurement ranges can be adjusted. The adjustment of these ranges is carried out automatically by servo motors, and once the adjustment is complete, the measurement accuracy is ensured without the need for calibration. The device can be equipped with an external circulation cooling system, a duckbill-type side blowing dust prevention system, embedded intelligent modules, a host computer control system, and an external LED display screen. It is also capable of transmitting data to a network database, allowing for real-time monitoring of the data via smartphone or computer. As required, an automatically height-adjustable lifting platform can be installed at the bottom of the equipment to automatically adjust the height of the measurement center. High-precision structural steel tubes for aviation.