Steel platform load calculation
Thread Content
The company needs to build a platform with 8 tanks with a volumetric weight of 7.6 tons placed on the platform. The platform is 7 meters high and the platform itself weighs 24 tons. The platform has a total of 8 legs. The layout is as shown below. How to calculate the load of each leg?
Let the experts do the calculation. This should require a structural major.
This should be done by the equipment major who proposes the weight, the civil engineering major who proposes the load, and the structural major who conducts the basic design.
It should be this process. Those who don’t work in design institutes don’t know much about it.
The span is 7.2 meters, why not use 5 meters. The platform is 7 meters high, and diagonal braces must be added in the middle. It is stipulated that diagonal braces must be added for each floor higher than 4 meters. Let me give you a picture of each of our 5 square kettles. It seems to you that the foundation depth should be at least 1.2 meters and the thickness of the foundation steel plate should be at least 1.5cm. 80 * 80. There are 6 pieces of 2cm rebar 1 meter long for each foundation pit. The columns are made of 25-30mm H steel, and the main beams are also made of 25-30mm I-beam steel. Don't be surprised if it's a family thing.
Thank you, I have already found a design institute to design it.
Send me what you learned from the design institute/we will also learn from it* Down
Thank you for sharing, I’ll learn from it* one time