Tensile verification
Thread Content
There is a jar with 3 handles, and each handle exerts a 4T downward pulling force. The legs are made of 304 stainless steel OCr18Ni9, with an outer diameter of 89* and a wall thickness of 5. I need to know whether the feet can withstand a pull force of 4T, or what the minimum outer diameter and wall thickness of the tubes are required to meet this requirement. List the calculation steps; handwriting is also acceptable. The image is not clear; I can send a CAD file instead. If the calculation is correct and accepted, a red envelope of 100 will be given.
Moderator, why can’t I add pictures?
There is a selection table for Type B supported bearings; for custom ones, there are calculation formulas