Analyze in what aspects the installation faults of the conveyor belt manifest themselves

Thread Content

When installing the conveyor belt, we occasionally encounter some problems. How should we resolve these issues? Installation issues that arise during the use of conveyor belts include the following: 1. If the conveyor belt deviates from its intended path, adjust the tensioning shaft at one end of the driven shaft slowly; be careful not to make rapid adjustments, as this can cause damage to the edges of the conveyor belt. Method 1 for troubleshooting the installation of conveyor belts: In the case of chain-driven conveyor belts that experience skipping or unstable operation, it is necessary to check whether the sprockets at both ends of the drive shaft are operating in sync, as well as whether the tooth edges are excessively worn. 2. If the conveyor belt shakes, check the conveyor frame as well as the idlers inside the conveyor tunnel for signs of rust or failure to rotate, and adjust them one by one. 3. If the conveyor belt deviates from its path, adjust the tensioning shaft at one end of the driven shaft; do so slowly, as rapid adjustment can cause damage to the edges of the conveyor belt.