A brief analysis of the methods for operating and storing metal mesh belts

Thread Content

1. The metal mesh belt should be stored in a dry environment to prevent the motor from getting wet. When stored outdoors, metal mesh belts should be protected from rain. During storage and handling, care should be taken to prevent the metal mesh belt from being struck, so as to avoid damage to it. 2. The operating environment of the metal mesh belt should always be kept clean; its surface must remain tidy, and there should be no debris at the inlet and outlet openings. Regularly remove dust and other debris from the metal mesh belt and tubes. 3. Regularly top up or replace the lubricating grease in the bearings according to the operating environment conditions; operation without sufficient lubrication is strictly prohibited. 4. If, during operation of the metal mesh belt, abnormal noises are heard, the motor overheats severely, the housing becomes electrically charged, the switch trips, or the belt fails to start, the machine should be stopped immediately for inspection. To ensure safety, repairs are not allowed while the metal mesh belt is in operation. After maintenance, a trial run should be carried out for a period of time to confirm that there are no abnormalities before restarting the operation.