7 major features of vertical in-tank pumps! ~

Thread Content

In-tank vertical pump, 7 features worth buying: 1. Save electricity: The 1HP pump replaces the traditional 2HP pump, saving you energy. 2. Seal well: The impeller/motor shaft/bearing/flange base are all equipped with sealing rings or gaskets to prevent corrosion or water leakage. 3. High pressure: Compared with pumps with the same flow rate, the vertical pump in the tank has a pressure increase of 20%-30%. 4. Fewer faults: Etching pumps on the market are prone to failure. The vertical pump in the tank is resistant to high temperatures and pressures and has a low failure rate. 5. No overcurrent: Reasonable impeller and water chamber structures reduce liquid loss and ensure that the rated current is not exceeded. 6. Wide flow range: The number of nozzles is increased, the pressure drops gently, and the flow rate is 20% higher than that of its peers. 7. Large flow and few bubbles: The large flow pump is 1.6 times the conventional flow rate and has fewer bubbles. It is mostly used for tin chemical, OSP, etc.